Gauges

PRODUCT INFORMATION: AEM X-Series Tru-BoostX Boost Controller Gauge Accessory Kit. Silver Bezel and White Faceplate. For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Tru-Boost Controller Gauge with Boost Control Solenoid, 80 PSIg Internal MAP Sensor, Boost Hose Line and Wiring Harness. The Tru-BoostX Boost Controller Gauge delivers all of the features you loved about the original only now with AEMnet for data logging and a big, fat internal MAP sensor that can handle boost pressures up to 80 PSI of boost. The Tru-BoostX Boost Controller gauge delivers digital accuracy but with the simplicity of a manual boost controller. All programming is done using the faceplate buttons and no laptop is required. AEM’s specially designed Boost Control Solenoid and all necessary hardware is included. Program Two Boost Levels + Scramble Boost Setting – Program two boost modes for different levels of performance (up to 80PSIg internal MAP sensor), and program a time-based scramble boost setting that is controlled using a switched input. You can also turn off the controller and use the gauge as a display. Change Wastegate Open Pressure —Ideal for reducing boost spikes and improving spool up. Display Boost Levels in PSIg (PSI), BAR or kPa (PAS) –See your boost in the units you prefer, and scale the 24 outer LEDs to match your peak boost levels for the perfect sweeping motion. Set Alarms and Display Peak Boost —Set the 24 green outer LEDs to flash based on boost pressure so you are alerted to an overboost condition. A ground output is included for triggering an optional LED warning light. Select the “B” button to see peak boost level and clear the value using the menu. Overboost Protection Built In —Protects your engine from an overboost condition by shutting the boost control solenoid off until it is reactivated by you through the buttons on the faceplate. Integrated Error Protection —Alerts you to a fault if the boost control solenoid is shorted or disconnected so you are never left guessing whether the Tru-BoostX is operational. Datalog using AEMnet CAN bus —Outputting channels over AEMnet provides so much more than just boost pressure! Send 13 channels of data over a 2-wire connection, including boost pressure, peak boost, boost target, boost scramble duty, overboost status, wastegate crack pressure, boost control solenoid status and more. (NOTE: The original 30-4350 Tru Boost Controller Gauge is discontinued and has been replaced with the 30-0352 X-Series Tru-BoostX Controller Gauge, below) A boost display gauge and boost controller in one! Easy to program – no laptop required Boost control solenoid and all necessary hardware included On-board 80PSIg MAP sensor—no upgrade kit needed for high boost vehicles Two boost level settings and scramble boost setting Wastegate open pressure setting for controlling boost spikes and faster spool Display boost levels in PSI, BAR or kPa Overboost protection and programmable alarms, ground output for optional LED warning light Peak boost level recall X-Series design for the best visibility (87% larger center LED and 33% larger face design) X-Series dimensions make it easier to install (0.825” overall depth, 0.20” cup depth) AEMnet CAN bus enabled for data logging (13 channels of data over 2-wire connection) Standard 52mm (2-1/16”) cup 24 programmable green outer LEDs Auto dimming sensor for ideal brightness day or night Positive locking connectors Optional silver bezel with white faceplate accessory kit (30-0352-ACC) For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Wideband UEGO AFR Sensor Controller Gauge with OBDII Connectivity. Includes: X-Series Wideband Controller Gauge, Bosch LSU 4.9 Sensor, Wiring Harnesses, Black Bezel, Black AFR/Lambda Faceplate, OBD2 Cable & O2 Sensor Bung AEM's X-Series OBDII Wideband UEGO AFR Sensor Controller Gauge (PN 30-0334) provides tuners who are using piggyback tuning modules or open source software with the ability to view AFR through the factory CAN-bus stream that is output by the factory ECU, and deliver the most accurate, safe and powerful tune. The 30-0334 X-Series OBDII Wideband Gauge is validated to work with EFILive, HPTuners and DashDaq software. The X-Series Wideband AFR OBDII Gauge includes an OBDII pass-through connector and Bosch 4.9LSU sensor that can be free-air calibrated or used with the factory resistor calibration. Additional wiring for a 0-5v or RS232 Serial output can be added by the user for outputting to a data logger. This OBDII pass-through capability replaces the traditional AEMnet stream available in the 30-0300 X-Series Wideband AFR Gauge Controller. OBDII CAN-bus OUTPUT The OBDII output simulates an auxiliary ECU signal when plugged into a vehicle’s OBD port, which requires a unique address from the other ECUs already on a vehicle’s network. AEM’s default OBDII CAN address will work with most popular vehicles and adjustments should not be necessary. However, AEM has provided OBDII address programmability through the buttons on the gauge face if a different address other than the default address is required, allowing users to program ECU #, Parameter Identification (PID), Message Identifier, and Bit Rate. PATENTED X-DIGITAL TECHNOLOGY – It’s The Fastest X-Series Widebands are the fastest responding wideband air/fuel ratio controllers in independent testing against 17 other wideband UEGO air/fuel controllers.* The controller’s high speed, patented, X-Digital technology (Patent 9,575,030) ensures no loss of signal fidelity and full transient response, making it able to identify the slightest fluctuations in AFR and output them in full value. WHY RESPONSE TIME MATTERS Faster response time improves wideband feedback control, and can provide a safer, more powerful and accurate tune. AEM’s Wideband Controllers with X-Digital technology reduce deadtime and can improve the performance of your vehicle through more accurate AFR tuning. FACTORY CALIBRATION RESISTOR OR FREE-AIR CAL, IT’S YOUR CHOICE! X-Series Wideband Gauges and the X-Series Inline Controller support the popular Bosch 4.9LSU sensor, and can utilize both the factory calibration resistor and free-air calibration methods. This allows users to take advantage of the precise factory resistor calibration when a sensor is new but then allows for free-air calibrations if the user desires when the sensor ages.** It’s the perfect marriage of simplicity and accuracy! WHAT IS A WIDEBAND UEGO AIR/FUEL CONTROLLER? AEM's Wideband UEGO (Universal Exhaust Gas Oxygen, pronounced “You-Way-Go”) Controllers are powerful, cost effective tuning tools that allow users to accurately monitor the Air/Fuel Ratio (AFR) of their engine. WHY USE A WIDEBAND AIR/FUEL CONTROLLER? Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air/fuel controllers that can help ensure your vehicle is optimally tuned. X-SERIES WIDEBAND UEGO CONTROLLER FEATURES: Patented X-Digital Technology makes it the Fastest Responding Wideband AFR Controller (Patent # 9,575,030) OBDII pass-through provides AFR readings through the factory ECU CAN-bus – Ideal for users with piggyback programmers or open source tuning software Includes Bosch 4.9LSU wideband UEGO sensor and OBDII pass-through connector Use the factory 02 calibration or free-air calibrate using buttons on faceplate Compatible with vehicle/system voltages up to 16V Optional outputs for 0-5V & RS232 for data logging and feedback control (requires wiring) Can display AFR values in hundredths of % 52mm gauge diameter and slim 0.825” gauge depth Gauge cup depth only .200” deep! Auto dimming feature User configurable display via buttons on the gauge face for changing AFR values, Lambda and O2%, 3- or 4-digit display and OBDII output settings (if necessary) Black bezel and black dual faced faceplate included (silver bezel/white gauge option sold separately, PN 30-0300-ACC) Locking connectors For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series GPS Speedometer Gauge 0~160mph / 0~240kph Accessory Kit. Silver Bezel & White Faceplate For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series GPS Speedometer Gauge 0~160mph / 0~240kph. Black Bezel & Black Faceplate AEM’s X-Series GPS Speedometer (PN 30-0313) display ground speed, course and altitude via an included 10Hz GPS receiver. Users can integrate the X-Series GPS Speedo into an Infinity ECU to add track mapping, and an included Vehicle Speed signal can be outputted to an existing speedometer to eliminate the need for a vehicle speed sensor. A 10Hz GPS receiver receives speed, heading and altitude data from multiple satellites at 10 samples/second providing excellent accuracy and reliability. The GPS receiver includes a magnet and adhesive bottom for exterior mounting on the vehicle. The X-Series GPS Speedometer Gauge has a bright four-digit LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. X-Series Gauges come with a black bezel and faceplate, and an optional silver bezel/white faceplate accessory kit is available (PN 30-0313-ACC, sold separately). Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere. X-SERIES DIGITAL GPS SPEEDOMETER FEATURES: Displays ground speed, heading and altitude! Integrate with the Infinity ECU via AEMnet CAN bus to add track mapping! Transmit vehicle speed to an existing speedometer without needing a VSS sensor User selectable units of measurement (US or Metric) 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods Slim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere! 24 green outer LEDs for quick reference to engine parameter Optional silver bezel with white faceplate accessory kit available (sold separately, PN 30-0313-ACC) Auto dimming sensor delivers ideal display brightness Positive locking connector provides secure connection Compatible with 16v vehicle systems For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series AEMnet Can Bus Gauge Accessory Kit. Silver Bezel & White Faceplate For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series AEMnet Can Bus Gauge. Black Bezel & Black Faceplate AEM’s X-Series AEMnet CAN bus gauge (PN 30-0312) displays multiple channels of data from AEMnet CAN bus equipped devices—it’s like having multiple gauges in one display! The AEMnet CAN bus gauge connects to AEMnet-equipped devices through a 4-pin DTM connector and displays data in either US or Metric units. View multiple data channels from an Infinity ECU, Series 2 or EMS-4 standalone, view AFR or Lambda from X-Series Wideband Controllers or 4-Channel Wideband Controllers, or view vehicle speed and acceleration from a Vehicle Dynamics Module (see available Channels List). Users can program which available channels they want to see on the display, choose between displaying Lambda or AFR and clear peak values for channels by using the buttons on the faceplate. The X-Series AEMnet CAN bus Gauge has a bright four-digit LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. X-Series Gauges come with a black bezel and faceplate, and an optional silver bezel/white faceplate accessory kit is available (PN 30-0312-ACC, sold separately). Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere. X-SERIES DIGITAL AEMNET CAN bus GAUGE FEATURES: Reads data channels from AEMnet CAN bus-equipped devices! Choose which available channels you want to see using buttons on the faceplate User selectable units of measurement (US or Metric) User selectable wideband measurements (AFR or Lambda) Clear peak values for channels using buttons on the faceplate Auto-hides channels that aren’t present on the data stream 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods Slim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere! 24 green outer LEDs for quick reference to engine parameter Optional silver bezel with white faceplate accessory kit available (sold separately, PN 20-0312-ACC) Auto dimming sensor delivers ideal display brightness Positive locking connector provides secure connection Compatible with 16v vehicle systems For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series OBDII Gauge Accessory Kit. Silver Bezel & White Faceplate For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series OBDII Gauge. Black Bezel & Black Faceplate AEM’s X-Series OBDII gauge (PN 30-0311) puts multiple channels of data at your fingertips by reading the CAN bus stream of your vehicle’s OBD port and transmitting those channels to the gauge display. It reads Diagnostic Trouble Codes (DTCs) and gives you the ability to clear codes. Wiring is as simple as connecting the gauge to your vehicle’s OBDII port using the supplied connector! Because the X-Series OBDII gauge reads OBDII parameters transmitted through a vehicle’s CAN datastream, it will only work on 2008+ model year vehicles. EASY TO USE Use the ‘Page’ button on the gauge face to scroll through available channels of data transmitted through the OBD port. Possible channels are listed below and may include IAT, EGT, RPM, Ethanol %, MAF, Fuel Pressure, Manifold Pressure, Boost Pressure, TPS, Vehicle Speed, Lambda and more (channel availability is ultimately dependent upon what channels are programmed to transmit by the vehicle manufacturer). READ & CLEAR TROUBLE CODES The ‘DTC’ button tells the gauge to scan for trouble codes and will report any stored DTCs, allowing you to look them up and determine the course of repair. This button also allows users to cleat DTCs once the problem is resolved. The X-Series OBDII Gauge has a bright four-digit LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. X-Series Gauges come with a black bezel and faceplate, and an optional silver bezel/white faceplate accessory kit is available (PN 30-0311-ACC, sold separately). Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere. X-SERIES DIGITAL OBDII GAUGE FEATURES: Reads data channels from 2008+ MY vehicles through the OBDII port! Reads and clears Diagnostic Trouble Codes (DTCs)! Easy to install and wire –power and data come from OBDII port using supplied connector Slim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere! 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods Positive locking connector provides secure connection Auto dimming sensor delivers ideal display brightness 24 green outer LEDs for quick reference to engine parameter Black bezel and black faceplate included (silver bezel/white faceplate sold separately, PN 30-0311-ACC) Compatible with vehicle/system voltages up to 16V For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7performance.com. CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES: ABOUT AEM: AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses. AEM have a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first.  IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only. 

Read more less

PRODUCT INFORMATION: AEM X-Series Inline Wideband UEGO AFR Sensor Controller with X-Digital Technology. Includes: X-Series Inline Wideband Controller, Bosch LSU 4.9 Sensor & O2 Sensor Bung AEM’s X-Series Inline Wideband UEGO Air/Fuel Ratio Controllers are built upon unique, patented, 100% digital technology that makes them the fastest responding wideband air/fuel ratio controllers in independent testing*. The X-Series Wideband UEGO Air/Fuel Ratio Controller replaces the popular 30-2310 Inline Controller. X-Series Inline Wideband UEGO Controller features a weather-resistant, low-profile enclosure with status LEDs. It is ideal for users who do not need a gauge display and want the fastest response time when data logging or for feedback control when tuning with an engine management system. The X-Series Inline Controller includes a 0-5v and RS232 Serial Port output for feedback control and data logging, and an AEMnet (CANbus) output for data logging and daisy chaining multiple X-Series Controllers together (up to 16 cylinders) for recording AFR in multiple cylinders. It supports vehicle/system voltages up to 16V, and can be used on EFI or carbureted applications, and dynamometers in applications using gasoline, methanol, ethanol, Diesel, propane and CNG. PATENTED X-DIGITAL TECHNOLOGY Patented X-Digital wideband technology (Patent 9,575,030) gives these controllers the ability to read and report values that other controllers do not, which can deliver more optimized engine tuning and a safer overall operating condition. The controller’s high speed digital implementation ensures no loss of signal fidelity and full transient response, making it able to identify the slightest fluctuations in AFR and output them in full value. WHY RESPONSE TIME MATTERS Faster response time improves wideband feedback control, and can provide a safer, more powerful and accurate tune. AEM’s Wideband Controllers with X-Series digital technology can reduce deadtime and improve the performance of your vehicle through more accurate AFR tuning. Deadtime is the delay between when exhaust gas composition changes and when that change is reported by the O2 sensor. While flow of exhaust gases (transport delay) can affect deadtime, it is not the only source. Often, the sensing elements response to the gas is the largest contributor to deadtime when an engine is in high RPM under load. When tuning an engine using wideband AFR feedback control on an inertia dyno, deadtime affects the data you are looking at because it is reported in a different operating location than when it actually occurred. This means with long deadtimes, whatever changes you make to the base fueling will likely be in the wrong location. This can be particularly dangerous to high compression and high-boost forced induction vehicles, and EFI systems that use feedback control to auto tune. Reducing deadtime improves wideband feedback control, and can provide a safer, more powerful and accurate tune. AEM’s Wideband Controllers with X-Series digital technology can reduce deadtime and improve the performance of your vehicle through more accurate AFR tuning. FACTORY CALIBRATION RESISTOR OR FREE-AIR CAL, IT’S YOUR CHOICE! The X-Series Wideband Gauge and X-Series Inline Controller support the popular Bosch 4.9LSU sensor and can utilize both the factory calibration resistor and free-air calibration methods**. This allows users to take advantage of the precise factory resistor calibration when a sensor is new but then allows for free-air calibrations if the user desires when the sensor ages. It’s the perfect marriage of simplicity and accuracy! WHAT IS A WIDEBAND UEGO AIR/FUEL CONTROLLER? AEM's Wideband UEGO (Universal Exhaust Gas Oxygen, pronounced “You-Way-Go”) Controllers are powerful, cost effective tuning tools that allow users to accurately monitor the Air/Fuel Ratio (AFR) of their engine. WHY USE A WIDEBAND AIR/FUEL CONTROLLER? Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air/fuel controllers that can help ensure your vehicle is optimally tuned. X-Series Inline Wideband UEGO AFR Controller were fastest responding wideband air/fuel ratio controllers in an independent test vs. 17 competitors wideband AFR controllers Patented X-Digital technology (Patent 9,575,030) Includes Bosch 4.9LSU wideband UEGO sensor Factory calibrated resistor does not require free-air calibration, but technology allows for free-air calibration as sensor ages if user desires Compatible with vehicle/system voltages up to 16V 0-5V & RS232 output for data logging and feedback control, AEMnet (CANbus) for data logging and daisy-chaining multiple controllers up to 16 cylinders Weather-resistant, low profile design For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Pressure Gauge 0~15psi Accessory Kit. Silver Bezel & White Boost/Fuel Faceplate For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Pressure Gauge 0~15psi. Black Bezel & Black Boost/Fuel Faceplate AEM’s 30-0309 X-Series 0~15PSI Digital Boost/Fuel Pressure Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate boost or fuel pressure readouts up to 15 PSI in their high performance supercharged or carbureted vehicle. NOTE: The 30-0309 comes with a black bezel and reversible black PSI Boost/Fuel Pressure faceplate. You will need to purchase the optional 30-0309-ACC accessory kit to get the silver bezel and reversible white PSI Boost/Fuel Pressure faceplate. The faceplate is double sided with Boost PSI on one side and Fuel Pressure PSI on the other. EASIER TO READ Visual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. EASIER TO MOUNT Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere. SMARTER INTERFACE X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems. 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods Slim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere! Center LED is 87% larger than original AEM gauges 24 green outer LEDs for quick reference to engine parameter Peak/Recall via gauge face buttons User selectable threshold warnings Optional silver bezel with white faceplate accessory kit available (sold separately) AEMnet CANbus-enabled for transmitting data to EMS or Data Logger 0-5v analog outputs for transmitting data to EMS or Data Logger Auto dimming sensor delivers ideal display brightness Positive locking connectors provide secure connection For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Boost Pressure Gauge -30~60psi / -1~4bar Accessory Kit. Silver Bezel & White Faceplate For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Boost Pressure Gauge -30~60psi / -1~4bar. Black Bezel & Black Faceplate AEM’s 30-0308 X-Series -30in/Hg~60PSI / -1~4BAR Digital Boost Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate boost pressure readouts up to 60 PSI or 4 BAR in their high performance vehicle. NOTE: The 30-0308 comes with a black bezel and reversible black PSI/BAR boost pressure faceplate. You will need to purchase the optional 30-0308-ACC accessory kit to get the silver bezel and reversible white standard/metric boost pressure faceplate. Each faceplate is double sided with standard PSI on one side and metric BAR on the other. The calibration for standard or metric display is easily performed using the buttons on the face of the gauge. EASIER TO READ Visual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. EASIER TO MOUNT Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere. SMARTER INTERFACE X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems. 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods Slim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere! Programmable center LED is 87% larger than original AEM gauges 24 green outer LEDs for quick reference to engine parameter User selectable standard or metric display ( -30in/Hg~60PSI / -1~4BAR) Peak/Recall via gauge face buttons User selectable threshold warnings (excl. Volts) Optional silver bezel with white faceplate(s) accessory kits available (sold separately) AEMnet CANbus-enabled for transmitting data to EMS or Data Logger 0-5v analog outputs for transmitting data to EMS or Data Logger Auto dimming sensor delivers ideal display brightness Positive locking connectors provide secure connection For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Oil Pressure Gauge 0~150psi / 0~10bar Accessory Kit. Silver Bezel & White Faceplate For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Oil Pressure Gauge 0~150psi / 0~10bar. Black Bezel & Black Faceplate AEM’s 30-0307 X-Series 150 PSI/10 BAR Digital Oil Pressure gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate oil or fuel pressure readouts in their high performance vehicle. NOTE: The 30-0307 comes with a black bezel and black oil pressure faceplate. You will need to purchase the optional 30-0307-ACC accessory kit to get the silver bezel and white oil pressure faceplate. Each faceplate is double sided with standard PSI on one side and metric BAR on the other. The calibration for standard or metric display is easily performed using the buttons on the face of the gauge. EASIER TO READ Visual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. EASIER TO MOUNT Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere. SMARTER INTERFACE X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems. 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods Slim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere! Programmable center LED is 87% larger than original AEM gauges 24 green outer LEDs for quick reference to engine parameter User selectable standard or metric display (0-150 PSI/0-10 BAR) Peak/Recall via gauge face buttons User selectable threshold warnings (excl. Volts) Optional silver bezel with white faceplate(s) accessory kits available (sold separately) AEMnet CANbus-enabled for transmitting data to EMS or Data Logger 0-5v analog outputs for transmitting data to EMS or Data Logger Auto dimming sensor delivers ideal display brightness Positive locking connectors provide secure connection For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Boost Pressure Gauge -30inHg~35psi / -1~2.5bar Accessory Kit. Silver Bezel & White Faceplate For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Boost Pressure Gauge -30inHg~35psi / -1~2.5bar. Black Bezel & Black Faceplate AEM’s 30-0306 X-Series -30in/Hg~35PSI / -1~2.5BAR Digital Boost Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate boost pressure readouts up to 35 PSI or 2.5 BAR in their high performance vehicle. NOTE: The 30-0306 comes with a black bezel and reversible black PSI/BAR boost pressure faceplate. You will need to purchase the optional 30-0306-ACC accessory kit to get the silver bezel and reversible white standard/metric boost pressure faceplate. Each faceplate is double sided with standard PSI on one side and metric BAR on the other. The calibration for standard or metric display is easily performed using the buttons on the face of the gauge. EASIER TO READ Visual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. EASIER TO MOUNT Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere. SMARTER INTERFACE X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems. 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods Slim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere! Programmable center LED is 87% larger than original AEM gauges 24 green outer LEDs for quick reference to engine parameter User selectable standard or metric display ( -30in/Hg~35PSI / -1~2.5BAR) Peak/Recall via gauge face buttons User selectable threshold warnings Optional silver bezel and white faceplate accessory kit available (sold separately) AEMnet CANbus-enabled for transmitting data to EMS or Data Logger 0-5v analog outputs for transmitting data to EMS or Data Logger Auto dimming sensor delivers ideal display brightness Positive locking connectors provide secure connection For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series EGT Gauge 0~1800F / 0~1000C Accessory Kit. Silver Bezel & White Faceplate For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series EGT Gauge 0~1800F / 0~1000C. Black Bezel & Black Faceplate AEM’s 30-0305 X-Series 0-1800F/0-1000C Digital Exhaust Gas Temperature (EGT) gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want a highly accurate EGT readout in their high performance vehicle. NOTE: The 30-0305 comes with a black bezel and reversible Fahrenheit/Celsius black EGT faceplate. You will need to purchase the optional 30-0305-ACC accessory kit to get the silver bezel and reversible white EGT faceplate. The calibration for standard or metric display is easily performed using the buttons on the face of the gauge. EASIER TO READ Visual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. EASIER TO MOUNT Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere. SMARTER INTERFACE X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems. 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods Slim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere! Programmable 3- or 4-digit center LED is 87% larger than original AEM gauges 24 green outer LEDs for quick reference to engine parameter Peak/Recall via gauge face buttons User selectable threshold warnings (excl. Volts) Optional silver bezel with white faceplate(s) accessory kits available (sold separately) AEMnet CANbus-enabled for transmitting data to EMS or Data Logger 0-5v analog outputs for transmitting data to EMS or Data Logger Auto dimming sensor delivers ideal display brightness Positive locking connectors provide secure connection For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Volt Gauge 8~18V Accessory Kit. Silver Bezel & White Faceplate. For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Volt Gauge 8~18V. Black Bezel & Black Faceplate AEM’s 30-0303 X-Series Digital Voltmeter gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly a accurate voltage readout in their high performance vehicle. NOTE: The 30-0303 comes with a black bezel and black 8-18 Volts faceplate. You will need to purchase the optional 30-0303-ACC accessory kit to get the silver bezel and white Volts faceplate. EASIER TO READ Visual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. EASIER TO MOUNT Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere. SMARTER INTERFACE X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall on the Volts gauge. All X-Series gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems. 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods Slim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere! Programmable LED is 87% larger than original AEM gauges 24 green outer LEDs for quick reference to system voltage Peak/Recall via gauge face buttons Optional silver bezel with white faceplate accessory kit available (sold separately) AEMnet CANbus-enabled for transmitting data to EMS or Data Logger 0-5v analog outputs for transmitting data to EMS or Data Logger Auto dimming sensor delivers ideal display brightness Positive locking connectors provide secure connection For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Temperature Gauge 100~300F / 40~150C Accessory Kit. Silver Bezel. Black Transmission & Oil Faceplates. White Water, Transmission & Oil Faceplates. For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Temperature Gauge 100~300F / 40~150C. Black Bezel & Black Water Faceplate AEM’s 30-0302 X-Series 100-300 F/40-150C Digital Gauge combine incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate water, transmission and/or oil or temperature readouts in their high performance vehicle. NOTE: The 30-0302 comes with a black bezel and black water temperature faceplate. You will need to purchase the optional 30-0302-ACC accessory kit to get the silver bezel, white water, transmission and oil temp faceplates, and black transmission and oil temperature faceplates. Each faceplate is double sided with standard PSI on one side and metric BAR on the other. The calibration for standard or metric display is easily performed using the buttons on the face of the gauge. EASIER TO READ Visual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. EASIER TO MOUNT Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere. SMARTER INTERFACE X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems. 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods Slim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere! Programmable center LED is 87% larger than original AEM gauges 24 green outer LEDs for quick reference to engine parameter User selectable standard or metric display (100-300 F/40-150 C) Peak/Recall via gauge face buttons User selectable threshold warnings Optional silver bezel and faceplate accessory kits available (sold separately) AEMnet CANbus-enabled for transmitting data to EMS or Data Logger 0-5v analog outputs for transmitting data to EMS or Data Logger Auto dimming sensor delivers ideal display brightness Positive locking connectors provide secure connection For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Pressure Gauge 0~100psi / 0~7bar Accessory Kit. Silver Bezel. Black Fuel Faceplate. White Oil & Fuel Faceplates. For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Pressure Gauge 0~100psi / 0~7bar . Black Bezel & Black Oil Faceplate AEM’s 30-0301 X-Series 100 PSI/7 BAR Digital Oil/Fuel Pressure gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate oil or fuel pressure readouts in their high performance vehicle. NOTE: The 30-0301 comes with a black bezel and black oil pressure faceplate. You will need to purchase the optional 30-0301-ACC accessory kit to get the silver bezel, white oil pressure faceplate, black fuel pressure faceplate and white fuel pressure faceplate. Each faceplate is double sided with standard PSI on one side and metric BAR on the other. The calibration for standard or metric display is easily performed using the buttons on the face of the gauge. EASIER TO READ Visual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. EASIER TO MOUNT Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere. SMARTER INTERFACE X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems. 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods Slim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere! Programmable center LED is 87% larger than original AEM gauges 24 green outer LEDs for quick reference to engine parameter User selectable standard or metric display (0-100 PSI/0-7 BAR) Peak/Recall via gauge face buttons User selectable threshold warnings Optional silver bezel and faceplate accessory kits available (sold separately) AEMnet CANbus-enabled for transmitting data to EMS or Data Logger 0-5v analog outputs for transmitting data to EMS or Data Logger Auto dimming sensor delivers ideal display brightness Positive locking connectors provide secure connection For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Wideband UEGO AFR Sensor Controller Gauge Accessory Kit. Includes Silver Bezel & White AFR/Lambda Faceplate For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

PRODUCT INFORMATION: AEM X-Series Wideband UEGO AFR Sensor Controller Gauge with X-Digital Technology. Includes: X-Series Wideband Controller Gauge, Bosch LSU 4.9 Sensor, Wiring Harnesses, Black Bezel, Black AFR/Lambda Faceplate & O2 Sensor Bung AEM’s X-Series Wideband UEGO Air/Fuel Ratio Sensor Controller Gauges are built upon unique, patented 100% Digital technology (Patent 9,575,030) that makes them the fastest responding wideband air/fuel ratio controllers in independent testing. The X-Series Wideband UEGO AFR Sensor Controller Gauge (PN 30-0300) measures 2 1/16th-inch (52mm) in diameter and features a modern, visually striking faceplate and new seven-segment center display that is 87% larger than the 30-4110 AEM Wideband Gauge’s center display. This creates the perception of a larger overall gauge, but in a common 52mm size for easy mounting. Its slim depth (less than one inch overall) and ultra-slim cup depth of .200-inches dramatically increases its application base and potential mounting locations. The X-Series Wideband UEGO AFR Gauge has a user configurable display via buttons on the gauge face that allows you to change AFR values for different fuels, Lambda or O2%, change the center display to three or four digits, perform a free-air calibration if desired as the sensor ages, and change the CAN message ID when linking multiple X-Series Inline Controllers or X-Series Controller Gauges. A black bezel and black dual-faced faceplate for air/fuel and Lambda are included, and an optional silver bezel with white dual-faced air/fuel and Lambda faceplate is available (PN 30-0300-ACC, sold separately). An Auto Dimming feature is included. Locking connectors ensure a positive connection between the harnesses and gauge and a new single board design adds to the new gauge’s durability. The gauge includes a 0-5v and RS232 Serial Port output for feedback control and data logging, and an AEMnet (CANbus) output for data logging. AEMnet allows additional X-Series Wideband Controllers to be daisy chained together (up to 16 cylinders) for recording AFR in multiple cylinders. It supports vehicle/system voltages up to 16V, and can be used on EFI or carbureted applications, and dynamometers in applications using gasoline, methanol, ethanol, Diesel, propane, and CNG. X-Series Wideband UEGO AFR Controller Gauge were fastest responding wideband air/fuel ratio controllers in an independent test vs. 17 competitors wideband AFR controllers Patented X-Digital wideband technology (Patent 9,575,030) Includes Bosch 4.9LSU wideband UEGO sensor Factory calibrated resistor does not require free-air calibration, but technology allows for free-air calibration as sensor ages if user desires Compatible with vehicle/system voltages up to 16V 0-5V & RS232 output for data logging and feedback control, AEMnet (CANbus) for data logging and daisy-chaining multiple controllers up to 16 cylinders Can display AFR values in hundredths of % 52mm gauge diameter and slim 0.825” gauge depth Gauge cup depth only .200” deep! Auto dimming feature User configurable display via buttons on the gauge face for changing AFR values, Lambda and O2%, and 3- or 4-digit display Black bezel and black dual faced faceplate included (gauge only, silver bezel/white gauge option sold separately, PN 30-0300-ACC) Locking connectors For any support or advice please contact us on 0330 122 1950 or emailsales@form7performance.com.CHECK OUT AN OVERVIEW ON AEM DIGITAL GAUGES:ABOUT AEM:AEM create innovative new products that set the standard in the performance aftermarket, delivering the highest level of product integrity and making advanced technologies accessible to the racing masses.AEMhave a deep appreciation for every racer, enthusiast, and distribution partner who chooses to trust their products and always strive to provide an unparalleled customer service experience. They evolve to meet the support needs of their customers and put customers first. IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that product imagery may be generic and is used for illustrative purposes only.

Read more less

Looking for an accurate and reliable way to monitor your transmission temperature? Turbosmart has you covered with our electric transmission temperature gauge. This easy-to-install gauge comes with a bracket, anti-glare shield, wiring harness, and transmission temperature sensor. With a measurement range of 100-280°F, you can be sure you’re getting the most accurate reading possible. So, whether you’re looking to improve your vehicle’s performance or keep an eye on your transmission temperature, Turbosmart has the solution for you. Fascia diameter (gauge and bezel) – 57mm Rear diameter (gauge body) – 52mm

Read more less

Gauge Mounting Cup is an ideal accessory for the Turbosmart Boost Gauge.

Read more less

Turbosmart’s triple gauge L-bracket is a perfect way to mount up to three Turbosmart 52mm gauges. Constructed from powder-coated solid steel, this bracket offers superior durability and stability for your gauges. With its easy installation and secure mounting, the Turbosmart Triple Gauge L-Bracket ensures reliable readings and can be used for various vehicles. The Turbosmart L-Bracket is the ultimate choice for keeping your gauges secure and accurate. So if you’re looking for a reliable mounting solution for three 52mm Turbosmart gauges, look no further than Turbosmart’s triple gauge L-bracket. It’s the perfect way to make sure your gauges stay securely in place. Get yours today!

Read more less

Turbosmart Electric Exhaust Gas Temperature (EGT) Gauge is designed to monitor temperatures from 400-2200°F. This high-quality gauge includes a Turbosmart anti-glare shield, bracket, wiring harness and exhaust gas temperature sensor to ensure proper installation and operation. With Turbosmart’s EGT Gauge, you can accurately monitor exhaust temperatures to ensure your engine runs efficiently and safely. Turbosmart’s EGT Gauge provides the essential information you need to ensure your engine performs at its best. Get Turbosmart’s Electric Exhaust Gas Temperature Gauge today and take control of your engine tuning.

Read more less

Electric Exhaust Gas Temperature gauge, measuring from 200-1200°c. Includes gauge, anti-glare shield, bracket, wiring harness and exhaust gas temperature sensor.

Read more less

Turbosmart’s mechanical boost gauge is designed to provide reliable performance and accurate readings. With its black face, silver bezel, bright backlighting, and a vacuum range from 0-2 Bar (52mm – 2 1/16”), this Turbosmart Boost Gauge is perfect for use with any Turbosmart Gated Boost Control Valve. The Turbosmart Boost Gauge looks great on the dashboard and provides all of the necessary hook-up and panel mounting hardware right out of the box. This makes installation quick and easy – no extra parts or tools are required! With Turbosmart’s Mechanical Boost Gauge, you can count on safe, accurate readings day after day. So what are you waiting for – get Turbosmart Mechanical Boost Gauge and start accurately regulating your boost today!

Read more less

Turbosmart’s mechanical boost gauge is designed to provide accurate readings up to 30psi. It features a black face with a silver bezel and bright backlighting that ensures easy reading in any condition. The Turbosmart mechanical boost gauge is the perfect companion for any of Turbosmart’s Gated Boost Control Valves, as its simple mechanical operation makes it easy to use. With this Turbosmart boost gauge, you can monitor your turbo system performance quickly and precisely without worrying about complicated settings or operations. With Turbosmart’s reliable and accurate mechanical boost gauges, achieve peak performance from your turbo setup!

Read more less

Turbosmart’s Electric Boost, Only Gauge, is explicitly designed for turbo diesel vehicles. Unlike Turbosmart’s mechanical boost gauge, which also measures vacuum, the Electric Boost Only gauge measures only boost from 0-60 PSI. Since diesel engines do not produce a vacuum, the Boost Only gauge gives you more accurate boost readings for your turbo diesel vehicle. Includes bracket, anti-glare shield, MAP sensor, wiring harness, and PVC hose. Fascia diameter (gauge and bezel) – 57mm Rear diameter (gauge body) – 52mm SUITABLE FOR To suit turbo diesel engines producing up to 60PSI of boost.

Read more less

Turbosmart’s Electric Boost, Only Gauge, is explicitly designed for turbo diesel vehicles. Unlike Turbosmart’s mechanical boost gauge, which also measures vacuum, the Electric Boost Only gauge measures only boost from 0-30 PSI. Since diesel engines do not produce a vacuum, the Boost Only gauge gives you more accurate boost readings for your turbo diesel vehicle. Includes bracket, anti-glare shield, boost sensor, wiring harness, T-piece, PVC hose and inline filter. Fascia diameter (gauge and bezel) – 57mm Rear diameter (gauge body) – 52mm SUITABLE FOR Turbo diesel engines that produce up to 30PSI of boost.

Read more less

Turbosmart’s Electric Boost, Only Gauge, is explicitly designed for turbo diesel vehicles. Unlike Turbosmart’s mechanical boost gauge, which also measures vacuum, the Electric Boost Only gauge measures only boost from 4 Bar. Since diesel engines do not produce a vacuum, the Boost Only gauge gives you more accurate boost readings for your turbo diesel vehicle. Includes bracket, anti-glare shield, MAP sensor, wiring harness, and PVC hose. Fascia diameter (gauge and bezel) – 57mm Rear diameter (gauge body) – 52mm SUITABLE FOR To suit turbo diesel engines producing up to 30PSI of boost.

Read more less

Racer Gauges N2 are quick-responsive and high-accurate analog gauges. Gauges operates standalone and control unit is not necessary. *Racer Gauges N2 cannnot be linked to the Defi-Link System or ADVANCE System. *USDM models are sold only in the US. *SI models are sold globally except the US. Main specification Size: 2 1/16″(52mm), 2 3/8″(60mm), and 3 1/8″(80mm) Standalone/control unit NOT necessary/non-link system Self-diagnosis function of disconnected/short-circuit Swtich and indicator is attached to 3 1/8″(80mm) tachometer Illumination color: global model -> white, USDM models -> red In-house production stepping motor provides smooth operation. Commercial attachment necessary Illumination ON/OFF: interlocked with vehicle illumination switch Opening/ending modes Mounting bracket attached Corresponding numbers of cylinders: 1, 2, 3, 4, 5, 6, and 8 (only for tachometer)

Read more less

Racer Gauges N2 are quick-responsive and high-accurate analog gauges. Gauges operates standalone and control unit is not necessary. *Racer Gauges N2 cannnot be linked to the Defi-Link System or ADVANCE System. *USDM models are sold only in the US. *SI models are sold globally except the US. Main specification Size: 2 1/16″(52mm), 2 3/8″(60mm), and 3 1/8″(80mm) Standalone/control unit NOT necessary/non-link system Self-diagnosis function of disconnected/short-circuit Swtich and indicator is attached to 3 1/8″(80mm) tachometer Illumination color: global model -> white, USDM models -> red In-house production stepping motor provides smooth operation. Commercial attachment necessary Illumination ON/OFF: interlocked with vehicle illumination switch Opening/ending modes Mounting bracket attached Corresponding numbers of cylinders: 1, 2, 3, 4, 5, 6, and 8 (only for tachometer)

Read more less

Racer Gauges N2 are quick-responsive and high-accurate analog gauges. Gauges operates standalone and control unit is not necessary. *Racer Gauges N2 cannnot be linked to the Defi-Link System or ADVANCE System. *USDM models are sold only in the US. *SI models are sold globally except the US. Main specification Size: 2 1/16″(52mm), 2 3/8″(60mm), and 3 1/8″(80mm) Standalone/control unit NOT necessary/non-link system Self-diagnosis function of disconnected/short-circuit Swtich and indicator is attached to 3 1/8″(80mm) tachometer Illumination color: global model -> white, USDM models -> red In-house production stepping motor provides smooth operation. Commercial attachment necessary Illumination ON/OFF: interlocked with vehicle illumination switch Opening/ending modes Mounting bracket attached Corresponding numbers of cylinders: 1, 2, 3, 4, 5, 6, and 8 (only for tachometer)

Read more less

Racer Gauges N2 are quick-responsive and high-accurate analog gauges. Gauges operates standalone and control unit is not necessary. *Racer Gauges N2 cannnot be linked to the Defi-Link System or ADVANCE System. *USDM models are sold only in the US. *SI models are sold globally except the US. Main specification Size: 2 1/16″(52mm), 2 3/8″(60mm), and 3 1/8″(80mm) Standalone/control unit NOT necessary/non-link system Self-diagnosis function of disconnected/short-circuit Swtich and indicator is attached to 3 1/8″(80mm) tachometer Illumination color: global model -> white, USDM models -> red In-house production stepping motor provides smooth operation. Commercial attachment necessary Illumination ON/OFF: interlocked with vehicle illumination switch Opening/ending modes Mounting bracket attached Corresponding numbers of cylinders: 1, 2, 3, 4, 5, 6, and 8 (only for tachometer)

Read more less

Racer Gauges N2 are quick-responsive and high-accurate analog gauges. Gauges operates standalone and control unit is not necessary. *Racer Gauges N2 cannnot be linked to the Defi-Link System or ADVANCE System. *USDM models are sold only in the US. *SI models are sold globally except the US. Main specification Size: 2 1/16″(52mm), 2 3/8″(60mm), and 3 1/8″(80mm) Standalone/control unit NOT necessary/non-link system Self-diagnosis function of disconnected/short-circuit Swtich and indicator is attached to 3 1/8″(80mm) tachometer Illumination color: global model -> white, USDM models -> red In-house production stepping motor provides smooth operation. Commercial attachment necessary Illumination ON/OFF: interlocked with vehicle illumination switch Opening/ending modes Mounting bracket attached Corresponding numbers of cylinders: 1, 2, 3, 4, 5, 6, and 8 (only for tachometer)

Read more less

Racer Gauges N2 are quick-responsive and high-accurate analog gauges. Gauges operates standalone and control unit is not necessary. *Racer Gauges N2 cannnot be linked to the Defi-Link System or ADVANCE System. *USDM models are sold only in the US. *SI models are sold globally except the US. Main specification Size: 2 1/16″(52mm), 2 3/8″(60mm), and 3 1/8″(80mm) Standalone/control unit NOT necessary/non-link system Self-diagnosis function of disconnected/short-circuit Swtich and indicator is attached to 3 1/8″(80mm) tachometer Illumination color: global model -> white, USDM models -> red In-house production stepping motor provides smooth operation. Commercial attachment necessary Illumination ON/OFF: interlocked with vehicle illumination switch Opening/ending modes Mounting bracket attached Corresponding numbers of cylinders: 1, 2, 3, 4, 5, 6, and 8 (only for tachometer)

Read more less

Racer Gauges N2 are quick-responsive and high-accurate analog gauges. Gauges operates standalone and control unit is not necessary. *Racer Gauges N2 cannnot be linked to the Defi-Link System or ADVANCE System. *USDM models are sold only in the US. *SI models are sold globally except the US. Main specification Size: 2 1/16″(52mm), 2 3/8″(60mm), and 3 1/8″(80mm) Standalone/control unit NOT necessary/non-link system Self-diagnosis function of disconnected/short-circuit Swtich and indicator is attached to 3 1/8″(80mm) tachometer Illumination color: global model -> white, USDM models -> red In-house production stepping motor provides smooth operation. Commercial attachment necessary Illumination ON/OFF: interlocked with vehicle illumination switch Opening/ending modes Mounting bracket attached Corresponding numbers of cylinders: 1, 2, 3, 4, 5, 6, and 8 (only for tachometer)

Read more less

Racer Gauges N2 are quick-responsive and high-accurate analog gauges. Gauges operates standalone and control unit is not necessary. *Racer Gauges N2 cannnot be linked to the Defi-Link System or ADVANCE System. *USDM models are sold only in the US. *SI models are sold globally except the US. Main specification Size: 2 1/16″(52mm), 2 3/8″(60mm), and 3 1/8″(80mm) Standalone/control unit NOT necessary/non-link system Self-diagnosis function of disconnected/short-circuit Swtich and indicator is attached to 3 1/8″(80mm) tachometer Illumination color: global model -> white, USDM models -> red In-house production stepping motor provides smooth operation. Commercial attachment necessary Illumination ON/OFF: interlocked with vehicle illumination switch Opening/ending modes Mounting bracket attached Corresponding numbers of cylinders: 1, 2, 3, 4, 5, 6, and 8 (only for tachometer)

Read more less

Racer Gauges N2 are quick-responsive and high-accurate analog gauges. Gauges operates standalone and control unit is not necessary. *Racer Gauges N2 cannnot be linked to the Defi-Link System or ADVANCE System. *USDM models are sold only in the US. *SI models are sold globally except the US. Main specification Size: 2 1/16″(52mm), 2 3/8″(60mm), and 3 1/8″(80mm) Standalone/control unit NOT necessary/non-link system Self-diagnosis function of disconnected/short-circuit Swtich and indicator is attached to 3 1/8″(80mm) tachometer Illumination color: global model -> white, USDM models -> red In-house production stepping motor provides smooth operation. Commercial attachment necessary Illumination ON/OFF: interlocked with vehicle illumination switch Opening/ending modes Mounting bracket attached Corresponding numbers of cylinders: 1, 2, 3, 4, 5, 6, and 8 (only for tachometer)

Read more less