OIL COOLERS

PRODUCT INFORMATION: CSF’s high-performance oil coolers help to keep oil temperatures consistently lower than the factory oil cooler. This is because your factory oil cooler was designed for standard power levels and expected type of use, as soon as you go outside of the factory power levels and expected type of use, your factory oil cooler will begin to struggle. As well as this, as your oil cooler goes through its life the core will deteriorate externally as well as fill with contaminates internally to reduce its cooling power. For any support or advice please contact us on 0330 122 1950 or emailsales@form7perforamnce.com.CHECK OUT CSF AT AUTOSPORT INTERNATIONAL:IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that this products imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.

Read more less

PRODUCT INFORMATION: CSF’s Ultimate BMW E30 Group A/DTM Oil Cooler (S14/M20/Swaps) Designing the ultimate BMW E30 Oil Cooler was not an easy task. While with custom fabrication anything is possible, CSF prides itself on making upgraded products that fit like a factory unit. Fortunately, BMW already did some of the leg work for this in the late 1980s. The new CSF #8218 is based on the race-proven and championship winning formula used by BMW.. IMPROVED DESIGN At around 50% larger in size, the CSF #8218 Oil Cooler increases both fluid capacity and core surface area. The overall performance of the Oil Cooler far exceeds the factory cooler’s limits. 100% All-Aluminum construction ensures the best performance and durability. In addition, the black powder coat finish provides extra protection and offers an OEM look behind the grille of your E30. For any support or advice please contact us on 0330 122 1950 or emailsales@form7perforamnce.com. CHECK OUT CSF AT AUTOSPORT INTERNATIONAL: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that this products imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.

Read more less

PRODUCT INFORMATION: CSF 8202 Universal Single-Pass Oil Cooler w/ Direct Fitment for Porsche 911 Centre Front Oil Cooler (’73 RSR Style) Porsche Fitment This new specific oil cooler has custom end tanks with a 45° front angle, allowing it to fit flush inside ’73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling. Universal Fitment These oil coolers are commonly utilized for engine oil, transmission oil, power-steering fluid, and differential fluid, plus can be used as a water heat exchanger. These new oil coolers can be mounted horizontally, vertically, as well as parallel to the ground (provided that the oil cooler has proper air-flow). The longer/shorter rectangular sizing allows the oil coolers to be placed in spaces that don’t have much vertical surface area as well as promotes better airflow to the other components in the cooling system. The durable, heavy-duty bar and plate design can withstand a higher peak burst rate and road debris. High Efficiency & Rugged Durability Bar/Plate Design M22 x 1.5 Inlet/Outlet Connections Internal Radius for Maximum Flow Optimized to Also Accept AN-16 Connections Triangular Flush Mounting Holes (M8 x 1.25) “Aero-Flow” Bar Design for Lightweight, Strength, and Maximum Flow Satin Black Finish for Extreme Protection Against Corrosion and Debris Pressure Tested at 120psi For any support or advice please contact us on 0330 122 1950 or emailsales@form7perforamnce.com.CHECK OUT CSF AT AUTOSPORT INTERNATIONAL:IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that this products imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.

Read more less

PRODUCT INFORMATION: CSF 8201 Universal Dual-Pass Oil Cooler w/ Direct Fitment for Porsche 911 Centre Front Oil Cooler (’73 RS Style) Porsche Fitment Th is new specific oil cooler has custom end tanks with a 45° front angle, allowing it to fit flush inside ’73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling. Universal Fitment These oil coolers are commonly utilized for engine oil, transmission oil, power-steering fluid, and differential fluid, plus can be used as a water heat exchanger. These new oil coolers can be mounted horizontally, vertically, as well as parallel to the ground (provided that the oil cooler has proper air-flow). The longer/shorter rectangular sizing allows the oil coolers to be placed in spaces that don’t have much vertical surface area as well as promotes better airflow to the other components in the cooling system. The durable, heavy-duty bar and plate design can withstand a higher peak burst rate and road debris. High Efficiency & Rugged Durability Bar/Plate Design M22 x 1.5 Inlet/Outlet Connections Internal Radius for Maximum Flow Optimized to Also Accept AN-16 Connections Triangular Flush Mounting Holes (M8 x 1.25) “Aero-Flow” Bar Design for Lightweight, Strength, and Maximum Flow Satin Black Finish for Extreme Protection Against Corrosion and Debris Pressure Tested at 120psi For any support or advice please contact us on 0330 122 1950 or emailsales@form7perforamnce.com.CHECK OUT CSF AT AUTOSPORT INTERNATIONAL:IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that this products imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.

Read more less

PRODUCT INFORMATION: CSF High-Performance DCT Transmission Oil Cooler for Toyota GR Supra (A90/A91) CSF-8183 Specs: Innovative Dual-Core Design (Industry Exclusive) vs. OEM Single Core 240% Increase in Core Volume 130% Increase in Fluid Capacity Compared to OEM (CSF 550ml vs. OEM ~240ml) Two 16mm Stacked Cores = 32mm Core Width (44mm Overall Width) vs. OEM 15mm Core Width Rear Cooler: 15 Rows vs. OEM 12 Rows Front Cooler: Additional 12 Rows 5.4mm Tall Multi-Louvered Fin vs. OEM 7mm Made with CSF’s AC Condenser Technology Using a 1-Row Super-High Pressure 16mm 9-Channel Microtube for Optimal Oil Flow and Maximum Surface Area Contact 129mm Overall Height vs. OEM 125mm Allows for Maximum Performance Without Increasing Overall Surface Area or Blocking Airflow to Rest of Cooling System Utilizes OEM Top/Bottom Rubber Seals for Optimal Airflow OEM Style “Quick Connect” Inlet/Outlet Connections Drop-in Fit Requires No Modifications to Install Can be Installed With CSF’s High-Performance Heat Exchanger (CSF #8154) or with the OEM Cooling System 2-Year Limited Warranty Ideal for Road Racing, Drag Racing, and Vehicles With Increased Performance and/or Transmission Tuning For any support or advice please contact us on 0330 122 1950 or emailsales@form7perforamnce.com.CHECK OUT CSF AT AUTOSPORT INTERNATIONAL:IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that this products imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.

Read more less

PRODUCT INFORMATION: CSF is proud to announce the release of its highly anticipated Porsche 911/930 Turbo right fender oil cooler. CSF’s new release brings OEM tier-1 quality, innovative features, and value to the platform’s replacement and performance aftermarket (directly replaces OEM part number 930 207 053 02 and 930 207 053 04). For any support or advice please contact us on 0330 122 1950 or emailsales@form7perforamnce.com. CHECK OUT CSF AT AUTOSPORT INTERNATIONAL: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that this products imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.

Read more less

PRODUCT INFORMATION: Innovative 2 core in-series design Converted to an M2 style single-pass design with a high-pressure return line High-density multi-louvred fin design for maximum surface area contact Drop-in fit requiring zero modifications Track tested and race project by Hittman Racing's M235iR endurance race car ≈ 5°C-10°C  reduction in Engine Oil Temperature depending on ambient and load conditions (9°F-18°F) Replaces OEM # 17217618360 Year Model Sub-Model Chassis Code Engine Code 11-16 135i(X) 5 doors F20 N55 11-16 M135i(X) 3 doors F21 N55 Fits N55 engined BMW M135i, M235i, M235iR, 335i, 435i incl. X-Drive models. For any support or advice please contact us on 0330 122 1950 or emailsales@form7perforamnce.com.CHECK OUT CSF AT AUTOSPORT INTERNATIONAL:IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that this products imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.

Read more less

PRODUCT INFORMATION: The CSF-8119 is used as the engine oil cooler for the CSF EVOX . Mounted underneath the right headlight, the oil cooler design allows endless mounting configurations in ways most conventional oil coolers cannot. Also, the durability of the bar/plate core enables it to be installed in areas where a large amount of debris would typically be a problem for fear of puncture and failure. CSF #8119 Highlights 8 rows of high-pressure bar/plate oil cooling Dual-pass design Universal style M22 x 1.50 female fittings on same side (feed and return w/ 40-degree angle) For use with M30 / -16AN / -12AN union adapters Dimensions 13’L x 4.75’H x 2.25’W For any support or advice please contact us on 0330 122 1950 or emailsales@form7perforamnce.com.CHECK OUT CSF AT AUTOSPORT INTERNATIONAL:IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that this products imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.

Read more less

PRODUCT INFORMATION: CSF Porsche RSR (CSF-8111) style bar and plate oil coolers for air-cooled Porsche 911s 'till 1989. This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units! Product Features Heavy duty bar/plate core New Aero-flow bar design for low mass, strength and maximum airflow through the core Satin Black finish for protection against corrosion and debris Triangular flush mounting holts on both top & bottom (M8x1.25) Slight 15 degree angle for connections (M22x1.5 female) with tapered, cast end-tanks For any support or advice please contact us on 0330 122 1950 or emailsales@form7perforamnce.com.CHECK OUT CSF AT AUTOSPORT INTERNATIONAL:IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that this products imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.

Read more less

PRODUCT INFORMATION: RS (CSF-8110) style bar and plate oil coolers for air-cooled Porsche 911s 'till 1989. This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units! Product Features Heavy duty bar/plate core New Aero-flow bar design for low mass, strength and maximum airflow through the core Satin Black finish for protection against corrosion and debris Triangular flush mounting holts on both top & bottom (M8x1.25) Slight 15 degree angle for connections (M22x1.5 female) with tapered, cast end-tanks 609mm Length x 54.6mm Width x 146mm Height For any support or advice please contact us on 0330 122 1950 or emailsales@form7perforamnce.com.CHECK OUT CSF AT AUTOSPORT INTERNATIONAL:IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that this products imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.

Read more less

PRODUCT INFORMATION: CSF R35 GT-R oil cooler (CSF #8097) Direct fit high-performance oil cooler for the Nissan GT-R (R35) [All 09+ USDM, JDM, and European models) High-Performance bar/plate core. Increase in core thickness from OEM tube/fin style 51mm to high-performance bar/plate 60mm for better cooling and oil capacity. Tested at ~10% more efficient than AMS. Staggered external fin configuration for maximum surface area contact and heat dissipation. Drop-in fit. A complete plug-and-play solution. Requires no modifications to install. Uses all attaching OEM components. Cast endtank design for precise fitment and maximum value Satin black heat dispersion coating Designed and manufactured by OEM cooling partner CSF Cooling – Individually leak tested before packaging For any support or advice please contact us on 0330 122 1950 or emailsales@form7perforamnce.com.CHECK OUT CSF AT AUTOSPORT INTERNATIONAL:IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that this products imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.

Read more less

PRODUCT INFORMATION: Push your M2 hard enough at the track and you'll know all to well about the buzz-killing oil temperature limp mode. The stock engine oil cooler is not sufficient at the track, temperatures skyrocket, oil deteriorates and limp mode is entered. Once limp-mode is entered you need to reduce the load on the engine to lower the oil temps. With the CSF Race-Spec oil cooler say goodbye to nursing your car around hot oil temps! Our cooler, tested in excruciating 46C temperatures has been proven to lower your M2 out of the oil temp limp mode and bring the fun back! Details below... Innovative 2-core in-series system. Front full size core has 17 cooling tubes versus OEM 15 tubes Secondary in-series backside cooler has an additional 6 rows of cooling Made with CSF’s AC condenser technology using a 1-row super-high pressure 26mm multi-channel microtube. High-density multi-louvered fin design for maximum surface area contact. “Drop-in fit” requiring no modifications to install. Accepts all attaching OEM components including oil-line connections, mounting brackets, and shroud/ducting World’s 1st and only true “plug-and-play” upgraded engine oil cooler for the BMW N55 engine in the BMW F87 M2 (2016+) Track tested in 39C (46C heat index) – max oil temperature achieved 115C. This is a reduction from 135C/137C track oil temperatures (limp mode) when testing with the upgraded CSF cooler on the vehicle versus the OEM cooler. Need additional ½ quart for proper fill-up during installation (OEM cooler is 7 quarts. CSF’s upgrade Race-Spec M2 oil cooler required ~7.5 quarts to fill up properly. For any support or advice please contact us on 0330 122 1950 or emailsales@form7perforamnce.com.CHECK OUT CSF AT AUTOSPORT INTERNATIONAL:IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that this products imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.

Read more less

PRODUCT INFORMATION: CSF is excited to release the of our BMW E30 oil cooler, with the E30 quickly becoming a modern classic and becoming the choice of many an enthusiast, the CSF-8092 Oil cooler is a must have addition to any restoration/modification project. Developed in the US alongside R&D partner CA Tuned, CSF have been able to incorporate many features into our drop-in E30 Oil cooler. CSF-8092 BMW E30 Oil Cooler Direct fit oil cooler for BMW E30, Also can fit other M20 engine swap set-ups. Comes complete with fitting kit for both OEM style as well as -10 AN male connections.  High-performance bar/plate design for maximum durability and performance. Cast end tank design. Direct fit oil cooler for BMW E30 Also can fit other M20 engine swap set-ups Comes complete with fitting kit for both OEM style as well as -10 AN male connections High-performance bar/plate design for maximum durability and performance Cast end tank design Matte black finish OEM # 1719179 Direct fit for: 1988-1991 E30 BMW 325i / BMW 325is / BMW 325iX. For any support or advice please contact us on 0330 122 1950 or emailsales@form7perforamnce.com.CHECK OUT CSF AT AUTOSPORT INTERNATIONAL:IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that this products imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.

Read more less

PRODUCT INFORMATION: CSF Race Universal Dual-Pass internal/external oil cooler - 22.0L' x 5.0H' x 2.25W' (CSF-8066) Specs Heavy duty bar/plate construction for durability & strength (Ideal for external placement) Dual-pass design Turbulated 8-row core w/ high density multi-louvered fin pitch -10 AN Male inlet/outlet connections Flip-able universal design for inlet/outlet on either side 2 M8 Mounting Bosses (w/ steel helicoil) Unique semi-gloss / matte black powder coat finish using thermal rejecting powder Dimensions 22’L x 5’H x 2.25’W For any support or advice please contact us on 0330 122 1950 or emailsales@form7perforamnce.com.CHECK OUT CSF AT AUTOSPORT INTERNATIONAL:IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that this products imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.

Read more less

PRODUCT INFORMATION: CSF Race BMW E46 M3 race-spec Dual-pass oil cooler Designed, developed, and track proven in collaboration with BMW M3 tuning specialist and parts manufacturer, Rogue Engineering Replaces OEM unit single-pass design and plastic shroud with a unique top/bottom dual-pass design for maximum surface area and flow. “Drop-in fit” requiring no modifications to install. Accepts factory oil-line connections Fully TIG-welded extruded-end tank design vs. OEM mechanically jointed and tack-welded design for superior reliability & durability Fits precisely with the contour of the OEM bumper. No issues with aftermarket splitter attachement either Turbulated heavy/duty bar/plate design for the most reliable & durable oil cooler available for the platform 8 rows of maximum cooling with a high density multi-louvered fin pitch design Designed to work with OEM radiator brackets or CSF’s all-aluminium triple-pass radiator (CSF #7058) For any support or advice please contact us on 0330 122 1950 or emailsales@form7perforamnce.com.CHECK OUT CSF AT AUTOSPORT INTERNATIONAL:IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that this products imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.

Read more less

PRODUCT INFORMATION: CSF Race 13.8L x 10H Dual Fluid BAR&PLATE HD OIL COOLER w/ 9' SPAL FAN (1/3 and 2/3 partition) Dual Fluid Oil Cooler Heavy Duty w/ SPAL Fan Dimensions & Specs – 9.7 inches tall (~10 inches) – 13.8 inches wide (with brackets) ~14 inches) – 5.15 inch thick (with fan) – 5.65 inches wide with bracket overhang – 17 rows of cooling – split up into 2 sections of: 5 rows (30%) and 12 rows (70%) – Built in AN-10 male fittings (plug and play) – Pressure tested at 120 psi with extruded aluminium end tanks and heavy duty bar & plate design for max durability – extruded end tanks – Universal fit, and can be mounted many different ways – Can be used with any type of oil (i.e. engine oil, power steering fluid, transmission oil, gear-box fluid) For any support or advice please contact us on 0330 122 1950 or emailsales@form7perforamnce.com.CHECK OUT CSF AT AUTOSPORT INTERNATIONAL:IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that this products imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.

Read more less

PRODUCT INFORMATION: HOSE 1- 17222283417 ORING - 2 x 17212283511 HOSE 1 - 17222284077 Check For any support or advice please contact us on 0330 122 1950 or emailsales@form7perforamnce.com.CHECK OUT CSF AT AUTOSPORT INTERNATIONAL: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that this products imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.

Read more less

AIRTEC Motorsport are proud to offer the oil cooler kit for the Focus RS MK3. Long overdue but its been worth the wait, making every part of our AIRTEC Motorsport oil cooler kit unique and finished to a stunning level of quality. Grill mounted to achieve maximum cold airflow and fits either side of grill as not to affect cold air feed for air filters. Kit Includes. 13 row high performance AIRTEC motorsportoil cooler Aeroquip 90 degree Black anodised fittings with Black Pro-Lite Oil hose Billets anodised Black hose line separators x 4 Gearbox mounted hose securing bracket finished in Pro Series Black Todays high performance vehicles pack a lot of power in a smaller package. In order to save both weight and space, the typical OEM cooling system is designed for normal driving conditions. When driven hard for extended periods, the cooling system may prove less than adequate. AIRTEC offers the solution to marginal cooling systems race proven lightweight and efficient oil coolers designed to fit in the smallest practical space. AIRTEC Part No: ATOILFO1

Read more less

AIRTEC Motorsport Oil Cooler Kit for Mk7 Golf R Following an extensive development process over the past year, AIRTEC Motorsport are proud to launch its new oil cooler kit aimed at modified Golf R owners who struggle to maintain steady oil temperatures on track, or during fast road use. Our kit has been designed in the UK after thorough research. The challenge was to integrate a large capacity, external oil-cooler, mounted behind the grille for direct airflow. This would replace the basic OEM oil heat-exchanger but would still integrate seamlessly by utilising the car’s original oil take-off fittings. The comprehensive package we subsequently developed includes AIRTEC Motorsport’s CNC, billet take-off adapter, an AIRTEC oil cooler, a laser-cut oil cooler bracket, high quality braided hose lines with Aerotec fittings and all fixtures and fittings including instructions, for a bolt-on installation. The kit has undergone extensive testing on race tracks throughout Europe to ensure engine running temperatures remain low and steady in a variety of different climates. Testing showed that even under heavy and continuous track use, oil temperatures continually remained below 110 degrees Celsius, where previously the engine would see peak temperatures as high as 127 degrees Celsius under the same circumstances. Its proven cooling efficiency and fitment makes it an essential modification for all modified Golf Rs. Key features: Proven to reduce temperatures on track and road Designed and developed in the UK Comprehensive kit with all fixtures, fittings and instructions AIRTEC large capacity external oil cooler CNC custom made billet take-off Laser cut bracket High-quality hose and fittings Bolt-on installation AIRTEC part no: ATMSVAG5

Read more less

Kit includes: Modified Earl’s TEMP-A-CURE™ oil cooler, with CNC billet mounting plate, has mounting points for RS & ST applications CNC remote oil cooler engine plate, Anodised Black with engraved logo Aeroquip 90 degree Black anodised fittings with Black Pro-Lite Oil hose Billet anodised black hose line separators x 4 Gearbox mounted hose securing bracket finished in ProSeries Black Horn Relocation Mounting bracket, finished in Pro-Series Satin Black Long overdue but it’s been worth the wait, making every part of our oil cooler kit unique and finished to a stunning level of quality. Grill mounted to achieve maximum cold airflow and fits either side of grill as not to affect cold air feed for air filters Earl’s TEMP-A-CURE™ oil cooler. Today’s high performance vehicles pack a lot of power in a smaller package. In order to save both weight and space, the typical OEM cooling system is designed for “normal” driving conditions. When driven hard for extended periods, the cooling system may prove less than adequate. Earl’s offers the solution to marginal cooling systems – race proven lightweight and efficient oil coolers designed to fit in the smallest practical space. Please note: Pre-Facelift Focus ST will require cutting behind the grille. This will incur extra labour costs (x2 hours) – will not fit the pre-facelift without cutting. AIRTEC Part No: ATOILFO2

Read more less

As part of our expanding Fiat product range, AIRTEC Motorsport is proud to launch our oil cooler kit upgrade suitable for track or fast road use. Following an extensive development process, AIRTEC Motorsport are proud to launch its new oil cooler kit aimed at modified Fiat 500/595/695 Abarth owners who struggle to maintain steady oil temperatures on track, or during fast road use. Our kit has been designed in the UK after thorough research and huge experience in developing uprated oil cooler packages for a variety of modified track and road cars. The challenge with this kit was to locate an external oil cooler in the small space available from where the original intercooler set up was positioned, whilst integrating seamlessly with the car’s existing fixtures and fittings to ensure no drilling or cutting was required. As a result, we have developed a kit that is completely reversible if need be. The comprehensive package includes a tried and tested 19-row oil cooler, our own design of sandwich plate made from billet and powder coated black, bespoke laser-cut and powder coated brackets, high quality braided hose lines with Aerotec fittings, and all fixtures for a simple bolt-on installation, including instructions. It’s cooling efficiency and easy fitment makes it an essential modification for all modified Fiat 500/595/695 Abarth models. PLEASE NOTE: THIS OIL COOLER KIT HAS BEEN DESIGNED TO FIT WITH AN AIRTEC MOTORSPORT UPRATED INTERCOOLER IN PLACE AND WILL NOT FIT WITH THE STANDARD TWIN-INTERCOOLER SETUP. WE CAN NOT CONFIRM IF THIS WILL FIT WITH ANY OTHER AFTER MARKET INTERCOOLER.  Key features: Designed and developed in the UK No cutting or drilling required to fit Reduces temperatures on track and road Billet sandwich plate finished in power coated black Bespoke laser-cut and powder coated brackets High quality hoses and fittings Comprehensive kit with all fixtures, fittings and instructions AIRTEC part no: ATMSFT1

Read more less

The new AIRTEC Motorsport oil cooler kit for R53 Supercharged Mini’s is a must mod for all modified cars Perfect for Fast Road and Track, keep those oil temps in check Features: Earl’s temp ‘a’ cool oil cooler Powder coated Black AIRTEC logo securing bracket with fixings Satin Black High pressure oil lines Anodised Black Aero style fixing (made by Aerotec) Genuine Mocal thermostat Billet oil line separators Billet alloy oil adaptor plate Without thermostat – £295 inc vat – recommended for hard track use and heavily modified cars With thermostat – £345 inc vat – perfect for cars that are used everyday all year round (good for winter month’s) ONLY AVAILABLE IN BLACK DOES NOT FIT WITH AIRTEC FRONT MOUNT INTERCOOLER KIT AIRTEC Part No: ATOILMINI1

Read more less

AIRTEC Motorsport are proud to offer the oil cooler kit for the Volvo C30 T5. Long overdue but it’s been worth the wait, making every part of our AIRTEC Motorsport oil cooler kit unique and finished to a stunning level of quality. Grill mounted to achieve maximum cold air flow. Kit Includes. 13 row high performance AIRTEC motorsport oil cooler Aeroquip 90 degree Black anodised fittings with Black Pro-Lite Oil hose Billets anodised Black hose line separators x 2 Gearbox mounted hose securing bracket finished in Pro-Series Black Today’s high performance vehicles pack a lot of power in a smaller package. In order to save both weight and space, the typical OEM cooling system is designed for normal driving conditions. When driven hard for extended periods, the cooling system may prove less than adequate. AIRTEC offers the solution to marginal cooling systems race proven lightweight and efficient oil coolers designed to fit in the smallest practical space. AIRTEC part no: ATOILVOL1

Read more less

AIRTEC Motorsport Oil Cooler Kit for Toyota Yaris GR. Following an extensive development process, AIRTEC Motorsport are proud to launch its new oil cooler kit aimed at modified Yaris GR owners who struggle to maintain steady oil temperatures on track, or during fast road use. Our kit has been designed in the UK after thorough research and huge experience in developing uprated oil cooler packages for a variety of modified track and road cars. The challenge with this kit was to integrate a large capacity, external oil cooler mounted neatly behind the grille for direct airflow, whilst integrating seamlessly with the car’s existing fixtures and fittings with no drilling or cutting required. As a result, we have developed a kit that is completely reversible if need be. The comprehensive package includes a tried and tested 13-row AIRTEC oil cooler, bespoke laser-cut and powdercoated AIRTEC brackets, high quality braided hose lines with Aerotec fittings, and all fixtures, including instructions, for a simple bolt-on installation. Its cooling efficiency and easy fitment makes it an essential modification for all modified Yaris GR’s. Key features: Designed and developed in the UK No cutting or drilling required to fit Reduces temperatures on track and road Proven AIRTEC large capacity external oil cooler Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Comprehensive kit with all fixtures, fittings and instructions Registered Design Right number: 6154878 AIRTEC part no: ATMSYGR04

Read more less

AIRTEC Motorsport Oil Cooler Kit for Honda Civic FK8 Type R As part of our expanding Honda Civic FK8 Type R product range, AIRTEC Motorsport is proud to launch our oil cooler kit suitable for track or fast road use. Our kit has been designed in the UK after thorough research and huge experience in developing uprated oil cooler packages for a variety of modified track and road cars. With limited space, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the bumper where it could still benefit from direct air flow, whilst integrating seamlessly with the car’s existing fixtures and fittings with no drilling or cutting required. As a result, we have developed a kit that is completely reversible if need be. The comprehensive package includes a tried and tested 13-row AIRTEC oil cooler, bespoke laser-cut and powder-coated AIRTEC bracket, high quality braided hose lines with Aerotec fittings, and all fixtures, including instructions, for a simple bolt-on installation. To ensure the maximum amount of air flow, we recommend removing the near side fog light and/or installing the exit vent that comes in the kit into the wheel arch liner to provide improved flow. However, these are not essential and the oil cooler will still work fine using the bumper’s original intake slots.   TESTED ON TRACK Following an extensive development process our oil cooler has been tried, tested and logged on the road and race track. Our comprehensive testing highlighted the oil cooler’s ability to cater with long periods of hard use, as seen by the oil temperature’s consistently low results in comparison to standard.   Its increased cooling efficiency and easy fitment makes it an essential modification for all modified FK8 Type R models. Key features: Designed and developed in the UK Reduces temperatures on track and road Proven AIRTEC large capacity oil cooler Bespoke laser-cut and powder-coated brackets High-quality hoses and fittings Comprehensive kit with all fixtures, fittings and instructions   Registered Design Right number: 6171877 AIRTEC part no: ATMSFK802

Read more less

As part of our expanding Mk4 Focus platform product range, AIRTEC Motorsport is proud to launch our oil cooler kit for the ST 2.3-litre model. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s oil cooling ability for modified Mk4 ST owners who struggle to maintain steady oil temperatures on track, or during fast road use. With vast experience in developing uprated oil cooler packages for a variety of modified track and road cars, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the upper grille area without obstructing the air intakes. As a result, our design includes a designated scoop on the left-hand side that supports the oil cooler and channels cold air towards the intakes. The package also includes an AIRTEC Motorsport oil cooler, bespoke laser-cut and powder coated brackets, high quality braided hose lines with Aerotec fittings, a thermostat-controlled sandwich plate and all fixtures and fittings, including instructions for a bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified Mk4 Focus ST models. Features: Comprehensive kit designed specially for the Mk4 Focus ST platform Reduces temperatures on track and road Scoop directs constant feed of cold air to the intake Designed and developed in the UK No cutting or drilling required to fit Proven AIRTEC large capacity external oil cooler Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Includes all fixtures and detailed instructions AIRTEC Part No: ATMSFO133

Read more less

As part of our expanding Fiat product range, AIRTEC Motorsport is proud to launch our oil cooler kit upgrade suitable for track or fast road use. Following an extensive development process, AIRTEC Motorsport are proud to launch its new oil cooler kit aimed at modified Fiat 500/595/695 Abarth owners who struggle to maintain steady oil temperatures on track, or during fast road use. Our kit has been designed in the UK after thorough research and huge experience in developing uprated oil cooler packages for a variety of modified track and road cars. The challenge with this kit was to locate an external oil cooler in the small space available from where the original intercooler set up was positioned, whilst integrating seamlessly with the car’s existing fixtures and fittings to ensure no drilling or cutting was required. As a result, we have developed a kit that is completely reversible if need be. The comprehensive package includes a tried and tested 19-row oil cooler, our own design of sandwich plate made from billet and powder coated black, bespoke laser-cut and powder coated brackets, high quality braided hose lines with Aerotec fittings, and all fixtures for a simple bolt-on installation, including instructions. It’s cooling efficiency and easy fitment makes it an essential modification for all modified Fiat 500/595/695 Abarth models. PLEASE NOTE: THIS OIL COOLER KIT HAS BEEN DESIGNED TO FIT WITH AN AIRTEC MOTORSPORT UPRATED INTERCOOLER IN PLACE AND WILL NOT FIT WITH THE STANDARD TWIN-INTERCOOLER SETUP. WE CAN NOT CONFIRM IF THIS WILL FIT WITH ANY OTHER AFTER MARKET INTERCOOLER.  Key features: Designed and developed in the UK No cutting or drilling required to fit Reduces temperatures on track and road Billet sandwich plate finished in power coated black Bespoke laser-cut and powder coated brackets High quality hoses and fittings Comprehensive kit with all fixtures, fittings and instructions AIRTEC part no: ATMSFT1

Read more less

AIRTEC Motorsport oil cooler kit for Astra H VXR.Designed and developed in house at AIRTEC HQ this makes our oil cooler kit unique and finished to a stunning level of quality.Grill mounted to achieve maximum cold airflow and fits either side of grill as not to affect cold air feed for air filters. Kit Includes. 13 row high performance AIRTEC motorsport oil cooler Aeroquip -8 90 & 45 degree Black anodised fittings with Black Pro-Lite Oil hose Gearbox mounted hose securing bracket finished in ProSeries Black Designed to fit with AIRTEC stage 3 intercooler & supplied with a bracket for cars running standard or other aftermarket intercooler!Today’s high performance vehicles pack a lot of power in a smaller package.In order to save both weight and space, the typical OEM cooling system is designed for “normal” driving conditions.When driven hard for extended periods, the cooling system may prove less than adequate.AIRTEC offers the solution to marginal cooling systems—race proven lightweight and efficient oil coolers designed to fit in the smallest practical space. ATOILVAUX1

Read more less

AIRTEC Motorsport Oil Cooler Kit for Hyundai i30N Following an extensive development process over the past year, AIRTEC Motorsport are proud to launch its new oil cooler kit aimed at modified i30N owners who struggle to maintain steady oil temperatures on track, or during fast road use. Our kit has been designed in the UK after thorough research and huge experience in developing uprated oil cooler packages for a variety of modified track and road cars. The challenge with this kit was to integrate a large capacity, external oil cooler mounted neatly behind the grille for direct airflow, whilst integrating seamlessly with the car’s existing fixtures and fittings with no drilling or cutting required. As a result, we have developed a kit that is completely reversible if need be. The comprehensive package includes a tried and tested 13-row AIRTEC oil cooler, bespoke laser-cut and powdercoated AIRTEC brackets, high quality braided hose lines with Aerotec fittings, and all fixtures, including instructions, for a simple bolt-on installation. Its cooling efficiency and easy fitment makes it an essential modification for all modified i30Ns. Key features: Designed and developed in the UK No cutting or drilling required to fit Reduces temperatures on track and road Proven AIRTEC large capacity external oil cooler Bespoke laser-cut and powdercoated brackets High-quality hoses and fittings Comprehensive kit with all fixtures, fittings and instructions Registered Design Right numbers: 6093141 & 6094142 Will not fit Facelift I30N. AIRTEC part no: ATMSHYU1

Read more less

AIRTEC Motorsport are proud to offer the oil cooler kit for the Fiesta ST 180 Long overdue but its been worth the wait, making every part of our AIRTEC Motorsport oil cooler kit unique and finished to a stunning level of quality. Grill mounted to achieve maximum cold airflow and fits either side of grill as not to affect cold air feed for air filters. Kit Includes. 13 row high performance AIRTEC motorsport oil cooler Aeroquip 90 degree Black anodised fittings with Black Pro-Lite Oil hose Billets anodised Black hose line separators x 4 Gearbox mounted hose securing bracket finished in ProSeries Black Designed to fit with AIRTEC stage 3 intercooler & supplied with a bracket for cars running standard or other aftermarket intercooler! Today s high performance vehicles pack a lot of power in a smaller package. In order to save both weight and space, the typical OEM cooling system is designed for normal driving conditions. When driven hard for extended periods, the cooling system may prove less than adequate. AIRTEC offers the solution to marginal cooling systems race proven lightweight and efficient oil coolers designed to fit in the smallest practical space. AIRTEC Part No: ATOILFO4

Read more less

PRODUCT FEATURES Universal fitment 34-row stacked-plate cooler withstands high fluid pressures, reduces oil temperatures, and exhibits minimal pressure loss Includes either standard or thermostatic billet anodized aluminum sandwich plate Includes preassembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak-free connections Includes 3/4" -16 and M20-1.5 sandwich plate adapters that support fitment for most makes and models Available in Sleek Silver or Stealth Black Easily replaceable thermostat allows you to customize your fluid temperature Additional thermostats available in 160°F, 185°F, and 200°F Mishimoto Lifetime Warranty DESCRIPTION Proper oil temperature regulation is key to extending and preserving the life of your stock or high performance engine. Keep your temperatures in check with the Mishimoto universal oil cooler kit. This kit is applicable for most vehicles and includes all key components for reducing oil temperatures and providing your engine with extra protection against oil degradation. This kit includes a billet anodized aluminium sandwich plate in either standard or thermostatic form. The optional Mishimoto thermostatic sandwich plate provides additional temperature control and will limit oil flow to the cooler until optimal temperatures are reached, making it ideal for those in cooler climates. The included core is our proven Mishimoto 34 row stacked plate cooler which can withstand high fluid pressures and significantly reduce oil temperatures while exhibiting minimal pressure loss. This kit includes both a -16 and M20-1.5 sandwich plate adapter which supports fitment for most makes and models. This kit also includes pre-assembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak free connections. Whether you are piloting a boosted rotary or blown small block the Mishimoto universal oil cooler kit will provide the efficiency you need to stay on the track and out of the shop. As with all our products this kit includes the Mishimoto Lifetime Warranty. Please note: Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at support@mishimoto.com if you have any questions. PURCHASE INCLUDES (1) - 34 Row Oil Cooler (Silver or Black) (1) - 4ft 9in Stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - 4ft .75in stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - M20 Thermostatic Sandwich Plate (Non-Thermostatic Available) (2) - -10AN Fittings (2) - Dowty Oil Seals (1) - Large O-Ring (2) - 1/8" NPT Allen Key Plugs (2) - Sandwich plate adapters

Read more less

PRODUCT FEATURES Universal fitment 16-row stacked-plate cooler withstands high fluid pressures, reduces oil temperatures, and exhibits minimal pressure loss Includes either standard or thermostatic billet anodized aluminum sandwich plate Includes preassembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak-free connections Includes 3/4" -16 and M20-1.5 sandwich plate adapters that support fitment for most makes and models Available in Sleek Silver or Stealth Black Easily replaceable thermostat allows you to customize your fluid temperature Additional thermostats available in 160°F, 185°F, and 200°F Mishimoto Lifetime Warranty DESCRIPTION Proper oil temperature regulation is key to extending and preserving the life of your stock or high performance engine. Keep your temperatures in check with the Mishimoto universal oil cooler kit. This kit is applicable for most vehicles and includes all key components for reducing oil temperatures and providing your engine with extra protection against oil degradation. This kit includes a billet anodized aluminum sandwich plate in either standard or thermostatic form. The optional Mishimoto thermostatic sandwich plate provides additional temperature control and will limit oil flow to the cooler until optimal temperatures are reached, making it ideal for those in cooler climates. The included core is our proven Mishimoto 16 row stacked plate cooler which can withstand high fluid pressures and significantly reduce oil temperatures while exhibiting minimal pressure loss. This kit includes both a -16 and M20-1.5 sandwich plate adapter which supports fitment for most makes and models. This kit also includes pre-assembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak free connections. Whether you are piloting a boosted rotary or blown small block the Mishimoto universal oil cooler kit will provide the efficiency you need to stay on the track and out of the shop. As with all our products this kit includes the Mishimoto Lifetime Warranty. Please note: Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at support@mishimoto.com if you have any questions. PURCHASE INCLUDES (1) - 16 Row Oil Cooler (Silver or Black) (1) - 4ft 9in Stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - 4ft .75in stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - M20 Thermostatic Sandwich Plate (Non-Thermostatic Available) (2) - -10AN Fittings (2) - Dowty Oil Seals (1) - Large O-Ring (2) - 1/8" NPT Allen Key Plugs (2) - Sandwich plate adapters

Read more less

PRODUCT FEATURES Universal fitment 34-row stacked-plate cooler withstands high fluid pressures, reduces oil temperatures, and exhibits minimal pressure loss Includes either standard or thermostatic billet anodized aluminum sandwich plate Includes preassembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak-free connections Includes 3/4" -16 and M20-1.5 sandwich plate adapters that support fitment for most makes and models Available in Sleek Silver or Stealth Black Easily replaceable thermostat allows you to customize your fluid temperature Additional thermostats available in 160°F, 185°F, and 200°F Mishimoto Lifetime Warranty DESCRIPTION Proper oil temperature regulation is key to extending and preserving the life of your stock or high performance engine. Keep your temperatures in check with the Mishimoto universal oil cooler kit. This kit is applicable for most vehicles and includes all key components for reducing oil temperatures and providing your engine with extra protection against oil degradation. This kit includes a billet anodized aluminium sandwich plate in either standard or thermostatic form. The optional Mishimoto thermostatic sandwich plate provides additional temperature control and will limit oil flow to the cooler until optimal temperatures are reached, making it ideal for those in cooler climates. The included core is our proven Mishimoto 34 row stacked plate cooler which can withstand high fluid pressures and significantly reduce oil temperatures while exhibiting minimal pressure loss. This kit includes both a -16 and M20-1.5 sandwich plate adapter which supports fitment for most makes and models. This kit also includes pre-assembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak free connections. Whether you are piloting a boosted rotary or blown small block the Mishimoto universal oil cooler kit will provide the efficiency you need to stay on the track and out of the shop. As with all our products this kit includes the Mishimoto Lifetime Warranty. Please note: Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at support@mishimoto.com if you have any questions. PURCHASE INCLUDES (1) - 34 Row Oil Cooler (Silver or Black) (1) - 4ft 9in Stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - 4ft .75in stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - M20 Thermostatic Sandwich Plate (Non-Thermostatic Available) (2) - -10AN Fittings (2) - Dowty Oil Seals (1) - Large O-Ring (2) - 1/8" NPT Allen Key Plugs (2) - Sandwich plate adapters

Read more less

PRODUCT FEATURES Universal fitment 34-row stacked-plate cooler withstands high fluid pressures, reduces oil temperatures, and exhibits minimal pressure loss Includes either standard or thermostatic billet anodized aluminum sandwich plate Includes preassembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak-free connections Includes 3/4" -16 and M20-1.5 sandwich plate adapters that support fitment for most makes and models Available in Sleek Silver or Stealth Black Easily replaceable thermostat allows you to customize your fluid temperature Additional thermostats available in 160°F, 185°F, and 200°F Mishimoto Lifetime Warranty DESCRIPTION Proper oil temperature regulation is key to extending and preserving the life of your stock or high performance engine. Keep your temperatures in check with the Mishimoto universal oil cooler kit. This kit is applicable for most vehicles and includes all key components for reducing oil temperatures and providing your engine with extra protection against oil degradation. This kit includes a billet anodized aluminium sandwich plate in either standard or thermostatic form. The optional Mishimoto thermostatic sandwich plate provides additional temperature control and will limit oil flow to the cooler until optimal temperatures are reached, making it ideal for those in cooler climates. The included core is our proven Mishimoto 34 row stacked plate cooler which can withstand high fluid pressures and significantly reduce oil temperatures while exhibiting minimal pressure loss. This kit includes both a -16 and M20-1.5 sandwich plate adapter which supports fitment for most makes and models. This kit also includes pre-assembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak free connections. Whether you are piloting a boosted rotary or blown small block the Mishimoto universal oil cooler kit will provide the efficiency you need to stay on the track and out of the shop. As with all our products this kit includes the Mishimoto Lifetime Warranty. Please note: Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at support@mishimoto.com if you have any questions. PURCHASE INCLUDES (1) - 34 Row Oil Cooler (Silver or Black) (1) - 4ft 9in Stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - 4ft .75in stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - M20 Thermostatic Sandwich Plate (Non-Thermostatic Available) (2) - -10AN Fittings (2) - Dowty Oil Seals (1) - Large O-Ring (2) - 1/8" NPT Allen Key Plugs (2) - Sandwich plate adapters

Read more less

PRODUCT FEATURES Universal fitment 34-row stacked-plate cooler withstands high fluid pressures, reduces oil temperatures, and exhibits minimal pressure loss Includes either standard or thermostatic billet anodized aluminum sandwich plate Includes preassembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak-free connections Includes 3/4" -16 and M20-1.5 sandwich plate adapters that support fitment for most makes and models Available in Sleek Silver or Stealth Black Easily replaceable thermostat allows you to customize your fluid temperature Additional thermostats available in 160°F, 185°F, and 200°F Mishimoto Lifetime Warranty DESCRIPTION Proper oil temperature regulation is key to extending and preserving the life of your stock or high performance engine. Keep your temperatures in check with the Mishimoto universal oil cooler kit. This kit is applicable for most vehicles and includes all key components for reducing oil temperatures and providing your engine with extra protection against oil degradation. This kit includes a billet anodized aluminium sandwich plate in either standard or thermostatic form. The optional Mishimoto thermostatic sandwich plate provides additional temperature control and will limit oil flow to the cooler until optimal temperatures are reached, making it ideal for those in cooler climates. The included core is our proven Mishimoto 34 row stacked plate cooler which can withstand high fluid pressures and significantly reduce oil temperatures while exhibiting minimal pressure loss. This kit includes both a -16 and M20-1.5 sandwich plate adapter which supports fitment for most makes and models. This kit also includes pre-assembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak free connections. Whether you are piloting a boosted rotary or blown small block the Mishimoto universal oil cooler kit will provide the efficiency you need to stay on the track and out of the shop. As with all our products this kit includes the Mishimoto Lifetime Warranty. Please note: Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at support@mishimoto.com if you have any questions. PURCHASE INCLUDES (1) - 34 Row Oil Cooler (Silver or Black) (1) - 4ft 9in Stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - 4ft .75in stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - M20 Thermostatic Sandwich Plate (Non-Thermostatic Available) (2) - -10AN Fittings (2) - Dowty Oil Seals (1) - Large O-Ring (2) - 1/8" NPT Allen Key Plugs (2) - Sandwich plate adapters

Read more less

PRODUCT FEATURES Universal fitment 16-row stacked-plate cooler withstands high fluid pressures, reduces oil temperatures, and exhibits minimal pressure loss Includes either standard or thermostatic billet anodized aluminum sandwich plate Includes preassembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak-free connections Includes 3/4" -16 and M20-1.5 sandwich plate adapters that support fitment for most makes and models Available in Sleek Silver or Stealth Black Easily replaceable thermostat allows you to customize your fluid temperature Additional thermostats available in 160°F, 185°F, and 200°F Mishimoto Lifetime Warranty DESCRIPTION Proper oil temperature regulation is key to extending and preserving the life of your stock or high performance engine. Keep your temperatures in check with the Mishimoto universal oil cooler kit. This kit is applicable for most vehicles and includes all key components for reducing oil temperatures and providing your engine with extra protection against oil degradation. This kit includes a billet anodized aluminum sandwich plate in either standard or thermostatic form. The optional Mishimoto thermostatic sandwich plate provides additional temperature control and will limit oil flow to the cooler until optimal temperatures are reached, making it ideal for those in cooler climates. The included core is our proven Mishimoto 16 row stacked plate cooler which can withstand high fluid pressures and significantly reduce oil temperatures while exhibiting minimal pressure loss. This kit includes both a -16 and M20-1.5 sandwich plate adapter which supports fitment for most makes and models. This kit also includes pre-assembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak free connections. Whether you are piloting a boosted rotary or blown small block the Mishimoto universal oil cooler kit will provide the efficiency you need to stay on the track and out of the shop. As with all our products this kit includes the Mishimoto Lifetime Warranty. Please note: Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at support@mishimoto.com if you have any questions. PURCHASE INCLUDES (1) - 16 Row Oil Cooler (Silver or Black) (1) - 4ft 9in Stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - 4ft .75in stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - M20 Thermostatic Sandwich Plate (Non-Thermostatic Available) (2) - -10AN Fittings (2) - Dowty Oil Seals (1) - Large O-Ring (2) - 1/8" NPT Allen Key Plugs (2) - Sandwich plate adapters

Read more less

PRODUCT FEATURES Universal fitment 16-row stacked-plate cooler withstands high fluid pressures, reduces oil temperatures, and exhibits minimal pressure loss Includes either standard or thermostatic billet anodized aluminum sandwich plate Includes preassembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak-free connections Includes 3/4" -16 and M20-1.5 sandwich plate adapters that support fitment for most makes and models Available in Sleek Silver or Stealth Black Easily replaceable thermostat allows you to customize your fluid temperature Additional thermostats available in 160°F, 185°F, and 200°F Mishimoto Lifetime Warranty DESCRIPTION Proper oil temperature regulation is key to extending and preserving the life of your stock or high performance engine. Keep your temperatures in check with the Mishimoto universal oil cooler kit. This kit is applicable for most vehicles and includes all key components for reducing oil temperatures and providing your engine with extra protection against oil degradation. This kit includes a billet anodized aluminum sandwich plate in either standard or thermostatic form. The optional Mishimoto thermostatic sandwich plate provides additional temperature control and will limit oil flow to the cooler until optimal temperatures are reached, making it ideal for those in cooler climates. The included core is our proven Mishimoto 16 row stacked plate cooler which can withstand high fluid pressures and significantly reduce oil temperatures while exhibiting minimal pressure loss. This kit includes both a -16 and M20-1.5 sandwich plate adapter which supports fitment for most makes and models. This kit also includes pre-assembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak free connections. Whether you are piloting a boosted rotary or blown small block the Mishimoto universal oil cooler kit will provide the efficiency you need to stay on the track and out of the shop. As with all our products this kit includes the Mishimoto Lifetime Warranty. Please note: Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at support@mishimoto.com if you have any questions. PURCHASE INCLUDES (1) - 16 Row Oil Cooler (Silver or Black) (1) - 4ft 9in Stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - 4ft .75in stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - M20 Thermostatic Sandwich Plate (Non-Thermostatic Available) (2) - -10AN Fittings (2) - Dowty Oil Seals (1) - Large O-Ring (2) - 1/8" NPT Allen Key Plugs (2) - Sandwich plate adapters

Read more less

PRODUCT FEATURES Universal fitment 13-row stacked-plate cooler withstands high fluid pressures, reduces oil temperatures, and exhibits minimal pressure loss Includes either standard or thermostatic billet anodized aluminum sandwich plate Includes preassembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak-free connections Includes 3/4" -16 and M20-1.5 sandwich plate adapters that support fitment for most makes and models Available in Sleek Silver or Stealth Black Easily replaceable thermostat allows you to customize your fluid temperature Additional thermostats available in 160°F, 185°F, and 200°F Mishimoto Lifetime Warranty DESCRIPTION Proper oil temperature regulation is key to extending and preserving the life of your stock or high performance engine. Keep your temperatures in check with the Mishimoto universal oil cooler kit. This kit is applicable for most vehicles and includes all key components for reducing oil temperatures and providing your engine with extra protection against oil degradation. This kit includes a billet anodized aluminum sandwich plate in either standard or thermostatic form. The optional Mishimoto thermostatic sandwich plate provides additional temperature control and will limit oil flow to the cooler until optimal temperatures are reached, making it ideal for those in cooler climates. The included core is our proven Mishimoto 13 row stacked plate cooler which can withstand high fluid pressures and significantly reduce oil temperatures while exhibiting minimal pressure loss. This kit includes both a -16 and M20-1.5 sandwich plate adapter which supports fitment for most makes and models. This kit also includes pre-assembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak free connections. Whether you are piloting a boosted rotary or blown small block the Mishimoto universal oil cooler kit will provide the efficiency you need to stay on the track and out of the shop. As with all our products this kit includes the Mishimoto Lifetime Warranty. Please note: Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at support@mishimoto.com if you have any questions. PURCHASE INCLUDES (1) - 13 Row Oil Cooler (Silver or Black) (1) - 4ft 9in Stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - 4ft .75in stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - M20 Thermostatic Sandwich Plate (Non-Thermostatic Available) (2) - -10AN Fittings (2) - Dowty Oil Seals (1) - Large O-Ring (2) - 1/8" NPT Allen Key Plugs (2) - Sandwich plate adapters

Read more less

PRODUCT FEATURES Universal fitment 13-row stacked-plate cooler withstands high fluid pressures, reduces oil temperatures, and exhibits minimal pressure loss Includes either standard or thermostatic billet anodized aluminum sandwich plate Includes preassembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak-free connections Includes 3/4" -16 and M20-1.5 sandwich plate adapters that support fitment for most makes and models Available in Sleek Silver or Stealth Black Easily replaceable thermostat allows you to customize your fluid temperature Additional thermostats available in 160°F, 185°F, and 200°F Mishimoto Lifetime Warranty DESCRIPTION Proper oil temperature regulation is key to extending and preserving the life of your stock or high performance engine. Keep your temperatures in check with the Mishimoto universal oil cooler kit. This kit is applicable for most vehicles and includes all key components for reducing oil temperatures and providing your engine with extra protection against oil degradation. This kit includes a billet anodized aluminum sandwich plate in either standard or thermostatic form. The optional Mishimoto thermostatic sandwich plate provides additional temperature control and will limit oil flow to the cooler until optimal temperatures are reached, making it ideal for those in cooler climates. The included core is our proven Mishimoto 13 row stacked plate cooler which can withstand high fluid pressures and significantly reduce oil temperatures while exhibiting minimal pressure loss. This kit includes both a -16 and M20-1.5 sandwich plate adapter which supports fitment for most makes and models. This kit also includes pre-assembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak free connections. Whether you are piloting a boosted rotary or blown small block the Mishimoto universal oil cooler kit will provide the efficiency you need to stay on the track and out of the shop. As with all our products this kit includes the Mishimoto Lifetime Warranty. Please note: Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at support@mishimoto.com if you have any questions. PURCHASE INCLUDES (1) - 13 Row Oil Cooler (Silver or Black) (1) - 4ft 9in Stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - 4ft .75in stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - M20 Thermostatic Sandwich Plate (Non-Thermostatic Available) (2) - -10AN Fittings (2) - Dowty Oil Seals (1) - Large O-Ring (2) - 1/8" NPT Allen Key Plugs (2) - Sandwich plate adapters

Read more less

PRODUCT FEATURES Universal fitment 13-row stacked-plate cooler withstands high fluid pressures, reduces oil temperatures, and exhibits minimal pressure loss Includes either standard or thermostatic billet anodized aluminum sandwich plate Includes preassembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak-free connections Includes 3/4" -16 and M20-1.5 sandwich plate adapters that support fitment for most makes and models Available in Sleek Silver or Stealth Black Easily replaceable thermostat allows you to customize your fluid temperature Additional thermostats available in 160°F, 185°F, and 200°F Mishimoto Lifetime Warranty DESCRIPTION Proper oil temperature regulation is key to extending and preserving the life of your stock or high performance engine. Keep your temperatures in check with the Mishimoto universal oil cooler kit. This kit is applicable for most vehicles and includes all key components for reducing oil temperatures and providing your engine with extra protection against oil degradation. This kit includes a billet anodized aluminum sandwich plate in either standard or thermostatic form. The optional Mishimoto thermostatic sandwich plate provides additional temperature control and will limit oil flow to the cooler until optimal temperatures are reached, making it ideal for those in cooler climates. The included core is our proven Mishimoto 13 row stacked plate cooler which can withstand high fluid pressures and significantly reduce oil temperatures while exhibiting minimal pressure loss. This kit includes both a -16 and M20-1.5 sandwich plate adapter which supports fitment for most makes and models. This kit also includes pre-assembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak free connections. Whether you are piloting a boosted rotary or blown small block the Mishimoto universal oil cooler kit will provide the efficiency you need to stay on the track and out of the shop. As with all our products this kit includes the Mishimoto Lifetime Warranty. Please note: Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at support@mishimoto.com if you have any questions. PURCHASE INCLUDES (1) - 13 Row Oil Cooler (Silver or Black) (1) - 4ft 9in Stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - 4ft .75in stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - M20 Thermostatic Sandwich Plate (Non-Thermostatic Available) (2) - -10AN Fittings (2) - Dowty Oil Seals (1) - Large O-Ring (2) - 1/8" NPT Allen Key Plugs (2) - Sandwich plate adapters

Read more less

PRODUCT FEATURES Universal fitment 16-row stacked-plate cooler withstands high fluid pressures, reduces oil temperatures, and exhibits minimal pressure loss Includes either standard or thermostatic billet anodized aluminum sandwich plate Includes preassembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak-free connections Includes 3/4" -16 and M20-1.5 sandwich plate adapters that support fitment for most makes and models Available in Sleek Silver or Stealth Black Easily replaceable thermostat allows you to customize your fluid temperature Additional thermostats available in 160°F, 185°F, and 200°F Mishimoto Lifetime Warranty DESCRIPTION Proper oil temperature regulation is key to extending and preserving the life of your stock or high performance engine. Keep your temperatures in check with the Mishimoto universal oil cooler kit. This kit is applicable for most vehicles and includes all key components for reducing oil temperatures and providing your engine with extra protection against oil degradation. This kit includes a billet anodized aluminum sandwich plate in either standard or thermostatic form. The optional Mishimoto thermostatic sandwich plate provides additional temperature control and will limit oil flow to the cooler until optimal temperatures are reached, making it ideal for those in cooler climates. The included core is our proven Mishimoto 16 row stacked plate cooler which can withstand high fluid pressures and significantly reduce oil temperatures while exhibiting minimal pressure loss. This kit includes both a -16 and M20-1.5 sandwich plate adapter which supports fitment for most makes and models. This kit also includes pre-assembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak free connections. Whether you are piloting a boosted rotary or blown small block the Mishimoto universal oil cooler kit will provide the efficiency you need to stay on the track and out of the shop. As with all our products this kit includes the Mishimoto Lifetime Warranty. Please note: Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at support@mishimoto.com if you have any questions. PURCHASE INCLUDES (1) - 16 Row Oil Cooler (Silver or Black) (1) - 4ft 9in Stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - 4ft .75in stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - M20 Thermostatic Sandwich Plate (Non-Thermostatic Available) (2) - -10AN Fittings (2) - Dowty Oil Seals (1) - Large O-Ring (2) - 1/8" NPT Allen Key Plugs (2) - Sandwich plate adapters

Read more less

PRODUCT FEATURES Direct fit for the 2015-2021 STI Minimal pressure loss 20+°F (16+°C) temperature drop This oil cooler kit retains the use of your stock liquid to liquid oil cooler unit Sleek Silver or Stealth Black cooler options Thermostatic option available Easily replaceable thermostat allows you to customize your fluid temperature Additional thermostats available in 160°F, 185°F, and 200°F Mishimoto Lifetime Warranty DESCRIPTION The Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015-2021 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty. Please note: Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at support@mishimoto.com if you have any questions. PURCHASE INCLUDES (2) Application-Specific Mounting Brackets (1) 19-Row Oil Cooler (Silver or Black) (1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings (1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings (1) M20 Sandwich Plate (Thermostatic Available) (1) M20 Stainless Steel Sandwich Plate Adapter (2) M20 x -10AN Straight Fittings (1) Mounting Hardware Set

Read more less

PRODUCT FEATURES Universal fitment 13-row stacked-plate cooler withstands high fluid pressures, reduces oil temperatures, and exhibits minimal pressure loss Includes either standard or thermostatic billet anodized aluminum sandwich plate Includes preassembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak-free connections Includes 3/4" -16 and M20-1.5 sandwich plate adapters that support fitment for most makes and models Available in Sleek Silver or Stealth Black Easily replaceable thermostat allows you to customize your fluid temperature Additional thermostats available in 160°F, 185°F, and 200°F Mishimoto Lifetime Warranty DESCRIPTION Proper oil temperature regulation is key to extending and preserving the life of your stock or high performance engine. Keep your temperatures in check with the Mishimoto universal oil cooler kit. This kit is applicable for most vehicles and includes all key components for reducing oil temperatures and providing your engine with extra protection against oil degradation. This kit includes a billet anodized aluminum sandwich plate in either standard or thermostatic form. The optional Mishimoto thermostatic sandwich plate provides additional temperature control and will limit oil flow to the cooler until optimal temperatures are reached, making it ideal for those in cooler climates. The included core is our proven Mishimoto 13 row stacked plate cooler which can withstand high fluid pressures and significantly reduce oil temperatures while exhibiting minimal pressure loss. This kit includes both a -16 and M20-1.5 sandwich plate adapter which supports fitment for most makes and models. This kit also includes pre-assembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak free connections. Whether you are piloting a boosted rotary or blown small block the Mishimoto universal oil cooler kit will provide the efficiency you need to stay on the track and out of the shop. As with all our products this kit includes the Mishimoto Lifetime Warranty. Please note: Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at support@mishimoto.com if you have any questions. PURCHASE INCLUDES (1) - 13 Row Oil Cooler (Silver or Black) (1) - 4ft 9in Stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - 4ft .75in stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting (1) - M20 Thermostatic Sandwich Plate (Non-Thermostatic Available) (2) - -10AN Fittings (2) - Dowty Oil Seals (1) - Large O-Ring (2) - 1/8" NPT Allen Key Plugs (2) - Sandwich plate adapters

Read more less

PRODUCT FEATURES Direct fit for the 2015-2021 STI Minimal pressure loss 20+°F (16+°C) temperature drop This oil cooler kit retains the use of your stock liquid to liquid oil cooler unit Sleek Silver or Stealth Black cooler options Thermostatic option available Easily replaceable thermostat allows you to customize your fluid temperature Additional thermostats available in 160°F, 185°F, and 200°F Mishimoto Lifetime Warranty DESCRIPTION The Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015-2021 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty. Please note: Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at support@mishimoto.com if you have any questions. PURCHASE INCLUDES (2) Application-Specific Mounting Brackets (1) 19-Row Oil Cooler (Silver or Black) (1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings (1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings (1) M20 Sandwich Plate (Thermostatic Available) (1) M20 Stainless Steel Sandwich Plate Adapter (2) M20 x -10AN Straight Fittings (1) Mounting Hardware Set

Read more less

PRODUCT FEATURES Direct fit for the right-hand-drive 2018+ Ford Mustang GT Innovative bar-and-plate oil cooler mounts in the upper grille, allowing more room for supercharger heat exchangers Mounting bracket also serves as an air diversion panel, directing the maximum amount of ambient air through the oil cooler Pre-made stainless steel braided oil lines with durable -AN fittings Includes replacement lower radiator hose to bypass the stock fluid-based oil cooler Removes the stock fluid-based oil cooler with Mishimoto Block Off Plate for proper installation Billet aluminum thermostatic oil sandwich plate Increases oil capacity by 1qt Fits with most aftermarket supercharger kits Easily replaceable thermostat allows you to customize your fluid temperature Additional thermostats available in 160°F, 185°F, and 200°F Mishimoto Lifetime Warranty DESCRIPTION Add some extra cooling power to your 2018+ Mustang GT with the Mishimoto Oil Cooler Kit. In 2018, Ford evolved their staple muscle car with a fresh and even more futuristic look on the S550. As the Mustang evolved, we evolved along with it to provide optimal cooling for your modern Mustang. Our engineers started with designing a heat exchanger from the ground up, to provide the largest oil cooler we have to offer and mounted directly to the front of the vehicle for optimal airflow. From there, we also developed an application specific mounting bracket that also serves as a diversion panel to further improve the airflow through the cooler. Our kit also includes a set of direct fit stainless-steel braided lines for a secure conduit to and from the cooler completed with -10AN fittings for a simplified installation. Finally, the Mishimoto 2018+ Ford Mustang GT Oil Cooler Kit includes our trusted thermostatic oil sandwich plate to protect against the overcooling of your engine oil. Our kit is available with the option of a silver or black cooler, and is protected under the Mishimoto Lifetime Warranty for a worry-free installation. PURCHASE INCLUDES (1) Application-Specific Mounting Bracket / Air Diversion Shield (1) Bar-and-Plate Oil Cooler (Silver or Black) (1) Right-Hand Drive Oil Cooler Block Off Plate (1) 2ft 3in Stainless Steel Braided Hose w/ -10AN Fittings (1) 4ft 8in Stainless Steel Braided Hose w/ -10AN Fittings (1) M22 Thermostatic Sandwich Plate (1) Application-Specific, M22 x 1.5 extended length center bolt (2) M20 x -10AN Straight Fittings (2) 1/8" NPT Plugs (1) Large O-ring (1) Lower Radiator Hose w/ worm gear clamps (1) Mounting Hardware Set Mishimoto Lifetime Warranty NOTES Requires the removal of the stock coolant based oil cooler.Installation requires the removal of the active grill shutters. Removal without tuning can cause a check engine light.Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs

Read more less

PRODUCT FEATURES Direct fit for 2012+ BMW M5/M6 models CNC-machined billet-aluminium end tanks provide improved durability over stock stamped tanks Robust bar-and-plate core resists damage from road debris and provides optimal cooling efficiency 24% increase in core volume over stock for improved cooling capacity 40% increase in external fin area provides improved heat transfer during extreme driving conditions Precision CNC-machined inlet and outlet prevent leaks Includes new OEM-quality oil line O-rings for easy installation Durable silver powder coated finish prevents corrosion Patent Pending Mishimoto Lifetime Warranty DESCRIPTION The BMW M5 power and handling statistics are completely mind-blowing for a car tipping the scales at well over two tons. The S63 twin-turbo V8 is underrated from the factory and responds well to tuning and bolt on modifications. Calling it the ultimate super sedan would not do this car justice, it’s just that good. But every amazing automobile must have an Achilles’ heel, right? Some investigation into this model told us that enthusiasts were seeing elevated oil temperatures during track driving conditions. Our team set out to create a replacement, high-performance oil cooler that could handle the rigors of extreme driving conditions and the abuse of daily commuting. The Mishimoto S63 M5/M6 oil cooler features extremely precise CNC-machined billet-aluminium end tanks which are professionally TIG-welded to our robust bar-and-plate core. Our strategically designed 55mm-thick core provides a massive 24% increase in core volume, and a 40% increase in external fin surface area. This added surface area promotes greater heat transfer, which directly impacts internal fluid temperatures. Our performance oil cooler is a complete bolt-on solution that includes everything needed for an easy installation such as hardware and replacement O-rings for the oil lines. Our heat exchanger is finished in a durable silver powder coat, providing both corrosion resistance and improved aesthetics. Whether your M5 sees frequent track time or just the occasional back-road jaunt, upgrading the oil cooler is a great way to extend the life of your S63 and ensure maximum engine output when you need it most. As with all our BMW products, this oil cooler includes our signature Mishimoto Lifetime Warranty. PURCHASE INCLUDES Purchase Includes: (1) Performance Oil Cooler (4) Mounting Bracket Grommets (2) Oil Line Connection M8 X 1.25 Bolts (2) Oil Line O-rings Mishimoto Lifetime Warranty

Read more less

PRODUCT FEATURES Robust 16-row stacked-plate oil cooler effectively reduces oil temps Helps protect critical engine components from premature wear Preserves oil viscosity for proper lubrication during aggressive driving Provides ample cooling with minimal pressure loss -10 AN inlet and outlet accept Mishimoto -10AN braided hoses and -10AN aluminium fittings 9 universal mounting holes provide abundant installation options Available in Sleek Silver, Stealth Black, or Bold Gold Mishimoto Lifetime Warranty DESCRIPTION Maintaining appropriate oil temperature is key to extending the life of your vehicle’s engine. Your engine oil is specifically designed to operate within a certain temperature and pressure range, ensuring proper lubrication and reduced wear. When a vehicle is extensively modified or used in high stress driving conditions, it's easy to exceed the limits of your engine oil, resulting in reduced lubrication and higher potential for wear and damage. The simple addition of a performance oil cooler is an easy way to reduce temperatures and bring them back into the effective range for proper lubrication. Mishimoto engineers have designed this 16-row stacked-plate oil cooler to provide substantial heat transfer and reduced temperatures. This oil cooler includes eight universal mounting holes, providing an abundance of options for mounting on your vehicle. Each cooler includes -10AN inlet and outlet fittings, ensuring leak-free operation. Mishimoto 16-row oil coolers are available in silver, black, or gold powder coated finishes. Be sure to pair with our -10AN braided hoses and -10AN aluminium fittings to complete your oil cooler installation. As with all our products, this 16-row fluid cooler includes our Mishimoto Lifetime Warranty. PURCHASE INCLUDES (1) Mishimoto 16-Row Oil Cooler Mishimoto Lifetime Warranty NOTES For your taste, only one side of the silver oil cooler has the Mishimoto logo, the stealth black option does not have a logo. Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at sales@form7performance.com if you have any questions.

Read more less

PRODUCT FEATURES Robust 16-row stacked-plate oil cooler effectively reduces oil temps Helps protect critical engine components from premature wear Preserves oil viscosity for proper lubrication during aggressive driving Provides ample cooling with minimal pressure loss -10 AN inlet and outlet accept Mishimoto -10AN braided hoses and -10AN aluminium fittings 9 universal mounting holes provide abundant installation options Available in Sleek Silver, Stealth Black, or Bold Gold Mishimoto Lifetime Warranty DESCRIPTION Maintaining appropriate oil temperature is key to extending the life of your vehicle’s engine. Your engine oil is specifically designed to operate within a certain temperature and pressure range, ensuring proper lubrication and reduced wear. When a vehicle is extensively modified or used in high stress driving conditions, it's easy to exceed the limits of your engine oil, resulting in reduced lubrication and higher potential for wear and damage. The simple addition of a performance oil cooler is an easy way to reduce temperatures and bring them back into the effective range for proper lubrication. Mishimoto engineers have designed this 16-row stacked-plate oil cooler to provide substantial heat transfer and reduced temperatures. This oil cooler includes eight universal mounting holes, providing an abundance of options for mounting on your vehicle. Each cooler includes -10AN inlet and outlet fittings, ensuring leak-free operation. Mishimoto 16-row oil coolers are available in silver, black, or gold powder coated finishes. Be sure to pair with our -10AN braided hoses and -10AN aluminium fittings to complete your oil cooler installation. As with all our products, this 16-row fluid cooler includes our Mishimoto Lifetime Warranty. PURCHASE INCLUDES (1) Mishimoto 16-Row Oil Cooler Mishimoto Lifetime Warranty NOTES For your taste, only one side of the silver oil cooler has the Mishimoto logo, the stealth black option does not have a logo. Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at sales@form7performance.com if you have any questions.

Read more less