POWERFLEX

Please note: PFR80-1310 rear beam mounting bush fits vehicles without watt linkage, PFR80-1410 rear beam mounting bush fits vehicles with watt linkage.Quantity Required: 2 (Pack Size: 2) / Diag Ref: 5 / Series: Road / Replaces OEM Part Numbers (OEM 1: 13267215, OEM 2: 13354691, ) PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.  All prices are for a SINGULAR bushing, please order the quantity required.

Read more less

PFR19-2030 is designed to eliminate creaks and squeaks from the rear springs. We have used our durable Purple 80 Shore A material to target reliability issues of the original part, since the softer OE specified foam quickly deteriorates, even on newer vehicles. Quantity Required: 2 (Pack Size: 2) / Diag Ref: 30 / Series: Road / Replaces OEM Part Numbers (OEM 1: 2037363, OEM 2: BV2Z-5586-B, ) PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.  Price per bushing 

Read more less

This is a polyurethane insert that fits into and fills the voids in original bush to stabilise the diff under acceleration.Quantity Required: 2 (Pack Size: 2) / Diag Ref: 27 / Series: Road / Replaces OEM Part Numbers (OEM 1: 33316792513, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

This is an insert that fits into voids in the original bush to reduce subframe movement. Quantity Required: 2 (Pack Size: 2) / Diag Ref: 20 / Series: Road / Replaces OEM Part Numbers (OEM 1: 33316792510, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

This is an insert that fits into voids in the original bush to reduce subframe movement. Quantity Required: 2 (Pack Size: 2) / Diag Ref: 19 / Series: Road / Replaces OEM Part Numbers (OEM 1: 33316792509 , )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Quantity Required: 1 (Pack Size: 1) / Bush Size: A=81mm B=45mm / Series: Road / Replaces OEM Part Numbers (OEM 1: 28780 S0100, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Quantity Required: 1 (Pack Size: 1) / Bush Size: A=65mm B=35mm / Series: Road / Replaces OEM Part Numbers (OEM 1: 28761 H1000, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

6 Sachets of Powerflex PTFE/Silicone grease specially formulated to work with our bushes. Quantity Required: 1 (Pack Size: 1) / Series: Road / PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Quantity Required: 2 (Pack Size: 2) / Diag Ref: 2 / Series: Road / Replaces OEM Part Numbers (OEM 1: 997.341.244.00, OEM 3: 996.341.341.08)PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

This part fits Front Anti-roll Bar with 20mm diameter size and OE bracket A2033232740. Brackets not included, image for illustrative purposes only.Quantity Required: 2 (Pack Size: 2) / Bush Size: 20 / Diag Ref: 3 / Series: Black / Replaces OEM Part Numbers (OEM 1: A2033232740, OEM 2: A2033231865, OEM 3: A2033234265)PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Quantity Required: 2 (Pack Size: 2) / Diag Ref: 2 / Series: Road / Replaces OEM Part Numbers (OEM 1: Fits lower arm OE Nr 4543450 / 4543468, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Quantity Required: 2 (Pack Size: 2) / Diag Ref: 10 / Series: Road / Replaces OEM Part Numbers (OEM 1: 6000073602, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

PFF76-925 Upper Engine Mount Insert is an affordable and easy-to-fit bush insert made from our Yellow 70A Durometer vibration-absorbing material, which works to stiffen the OEM upper engine mounting. This reduces twist of the engine under acceleration and during gear changes, giving the pedals a more direct feel, as well as reducing wheel-hop and letting you get the power down that little bit quicker. We recommend fitting PFF76-925 alongside our other Yaris GR powertrain inserts (PFF76-920 & PFF76-923), as they perform much more effectively as a full set. There will be a minor increase in NVH when stiffening the powertrain mountings. PFF76-925 is made from our Yellow 70A material and works bystiffening the OEM powertrain mounts reducing the amount of engine/trans roll and movement during hard acceleration and gear changing for a more responsive feel.Quantity Required: 1 (Pack Size: 1) / Diag Ref: 25 / Series: Road / Replaces OEM Part Numbers (OEM 1: 12305-18050, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

PFF76-923 Upper Gearbox Mount Insert is an affordable and easy-to-fit bush insert made from our Yellow 70A Durometer vibration-absorbing material, which works to stiffen the OEM upper gearbox mounting. This reduces twist of the engine under acceleration and during gear changes, giving the pedals a more direct feel, as well as reducing wheel-hop and letting you get the power down that little bit quicker. We recommend fitting PFF76-923 alongside our other Yaris GR powertrain inserts (PFF76-920 & PFF76-925), as they perform much more effectively as a full set. There will be a minor increase in NVH when stiffening the powertrain mountings. PFF76-923 is made from our Yellow 70A material and works bystiffening the OEM powertrain mounts reducing the amount of engine/trans roll and movement during hard acceleration and gear changing for a more responsive feel. Quantity Required: 1 (Pack Size: 1) / Diag Ref: 23 / Series: Road / Replaces OEM Part Numbers (OEM 1: 12372-18010, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

PFF76-920 Torque Mount Bush Insert is an affordable and easy-to-fit bush insert made from our Yellow 70A Durometer vibration-absorbing material, which works to stiffen the OEM torque mounting. This reduces twist of the engine under acceleration and during gear changes, giving the pedals a more direct feel, as well as reducing wheel-hop and letting you get the power down that little bit quicker. For milder applicationsPFF76-920can be fitted on it's own, but will perform most effectively when fitted with our other Yaris GR powertrain inserts (PFF76-923 & PFF76-925) as a full set. There will be a minor increase in NVH when stiffening the powertrain mountings. Our POWERFLEX PFF76-920 Lower Torque Mount increases the stiffness of the OEM powertrain mounts using our yellow 70A material.Quantity Required: 1 (Pack Size: 1) / Diag Ref: 20 / Series: Road / Replaces OEM Part Numbers (OEM 1: 12363-18010, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts.Quantity Required: 1 (Pack Size: 1) / Bush Size: 12mm / Series: Road+Black / PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Quantity Required: 1 (Pack Size: 1) / Bush Size: 70mm x 35mm x 11.7mm / Series: Road / Replaces OEM Part Numbers (OEM 1: 712770470 / 1756516020, OEM 2: 1H0253147B / 1H0253147C / 20650D0101, OEM 3: 255047 / 17565-28010 )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Quantity Required: 6 (Pack Size: 6) / Diag Ref: 30 / Series: Road / Replaces OEM Part Numbers (OEM 1: 9223022, OEM 2: 13107328, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Fits MK4 Astra and Zafira A SRi/GSi models with engine codes Z16LET, Z20LET and Z22SE only. It also fits MK5 Astra and Zafira B engine types Z20LEL, R & H including VXR models. Also fits 1.9 CDTi 8v and 16v (Z19DTx) vehicles. Powerflex dealers and Vauxhall specialists, Courtenay Sport have produced their own comprehensive fitting guide for PFF80-1321.Please click on the image below for more information.Quantity Required: 1 (Pack Size: 1) / Diag Ref: 21 / Series: Road / Replaces OEM Part Numbers (OEM 1: 90575458 / 13159995, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Allows adjustment of rear camber and toe, use with PFR85-1310G. Camber adjustment of +/- 1.0 degree when using both PFR85-1310G and PFR85-1311G bushes. For a non-adjustable bush use PFR85-1311.Quantity Required: 2 (Pack Size: 2) / Diag Ref: 11 / Series: Road / Replaces OEM Part Numbers (OEM 1: 7H8501131, OEM 2: 7H0501132A, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Allows adjustment of rear camber and toe, use with PFR85-1311G. Camber adjustment of +/- 1.0 degree when using both PFR85-1310G and PFR85-1311G bushes. For a non adjustable bush use PFR85-1310.Quantity Required: 2 (Pack Size: 2) / Diag Ref: 10 / Series: Road / Replaces OEM Part Numbers (OEM 1: 7H8501131, OEM 2: 7H0501131A, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

The lefthand bush on certain Volvo S60, S80, V60, V70, XC60, and XC70 models, featurea larger bracket with two additional threaded studs for anexhaust hanging bracket so we have included an additional plate thatretrofitsto our original bush, making fitment across all vehicles possible. PFR19-1917 Rear Trailing Arm Bush, is a long-term solutiontothe commonly replaced original bush. Often split and torn, replacing the OE trailing arm bushes islabourintensive and requires complex fitting tools, making it an expensive ordeal. Our busheshave been developed with dual material components and a moulded-in metal T-bracket making for a simplerfitment and cost-effective replacement.Quantity Required: 2 (Pack Size: 2) / Diag Ref: 17 / Series: Road / Replaces OEM Part Numbers (OEM 1: 1865033 / 1865034, OEM 2: 2040702 / 2040703, OEM 3: 31476221 / 31406349 / 31387282 / 31476223)PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

15% stiffer than the original bush and provides +/- 0.5 degrees of on-car camber adjustment. Suitable for 14mm bolt. Quantity Required: 2 (Pack Size: 2) / Bush Size: 14mm / Diag Ref: 1 / Series: Road / Replaces OEM Part Numbers (OEM 1: 1570284 / 1570285 / 1570287, OEM 2: 1570312 / 1570677 / 1570678, OEM 3: 1585054 / 1585059)PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

PFF19-803G is a CNC machined aluminium mount and polyurethane bush to provide 0.6 degrees of positive caster offset for improved handling. Focus ST and RS owners are all too familiar with the commonly reported torque steer effect of their vehicles. Our new part providescaster offset to improve handling characteristics and has been proven and tested on road and track. PFF19-803G Front Wishbone Rear Bush Caster Offsetis aCNC-machined Aluminium mount with Polyurethane bush providing approximately 0.6deg of caster offset. This improves camber gain in cornering without compromising straight line traction.In our Purple Shore 80A Road Series material, PFF19-803G is 55% stiffer than the original rubber bush, whilst our Black Series Shore 95A material is 270% stiffer than the original for those looking for a Track/Competition option.Quantity Required: 2 (Pack Size: 2) / Diag Ref: 2 / Series: Road / Replaces OEM Part Numbers (OEM 1: 1073214 / 1073215 / 98AG-3042-AJ / 98AG-3051-AJ, OEM 2: 1146307 / 1146305 / 1M5O-3042-AA / 1M5O-3051-AA, OEM 3: 1207973 / 1207974 / 2M51-3042-BC / 2M51-3051-BC) PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.  Prices are per bushing

Read more less

PFR19-2030 is designed to eliminate creaks and squeaks from the rear springs. We have used our durable Purple 80 Shore A material to target reliability issues of the original part, since the softer OE specified foam quickly deteriorates, even on newer vehicles. Quantity Required: 2 (Pack Size: 2) / Diag Ref: 30 / Series: Road / Replaces OEM Part Numbers (OEM 1: 2037363, OEM 2: BV2Z-5586-B, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Quantity Required: 2 (Pack Size: 2) / Diag Ref: 4 / Series: Road / Replaces OEM Part Numbers (OEM 1: 1805815, OEM 2: D65128460, ) PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.  Price is per bush 

Read more less

Quantity Required: 2 (Pack Size: 2) / Diag Ref: 2 / Series: Road / Replaces OEM Part Numbers (OEM 1: 31304040, OEM 2: 30645847, OEM 3: 31201003)PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

PFF88-1001 Front Wishbone Front Bush is designed to have a freely-rotating centre bar. This prevents torsional twist in the bush material, aiding performance, reliability and increasing longevity. PFF88-1001 Front Wishbone Front Bush is designed to have afreely-rotating centrebar. This prevents torsional twist in the bush material, aiding performance, reliability and increasing longevity.Quantity Required: 2 (Pack Size: 2) / Diag Ref: 1 / Series: Road / Replaces OEM Part Numbers (OEM 1: 31277881, OEM 2: 30639368, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Quantity Required: 2 (Pack Size: 2) / Diag Ref: 3 / Series: Road / Replaces OEM Part Numbers (OEM 1: 33326770817, OEM 2: 33326770786, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Quantity Required: 4 (Pack Size: 4) / Diag Ref: 5 / Series: Road / Replaces OEM Part Numbers (OEM 1: 33329061945, ) PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.  Price is per bushing

Read more less

Use PFF5-303 for the M3, or if increased caster is required. Quantity Required: 2 (Pack Size: 2) / Diag Ref: 1 / Series: Road / Replaces OEM Part Numbers (OEM 1: 31129069035 / 31129064875, OEM 2: 31121127378 / 31129058815, OEM 3: 31121130123 / 31129058931 / 31129059288) PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.  Price is per bushing

Read more less

This part fits models with a 23mm diameter Non Active Anti Roll Bar.Quantity Required: 2 (Pack Size: 2) / Bush Size: 23mm / Diag Ref: 14 / Series: Black / Replaces OEM Part Numbers (OEM 1: 33556776559, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

This is an Insert and fits into the original bush which reduces the subframe movement. This Insert does not fit the E70 X5 M or E71 X6 M models. Quantity Required: 2 (Pack Size: 2) / Diag Ref: 23 / Series: Black / Replaces OEM Part Numbers (OEM 1: 33316784940, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

This is an Insert and fits into the original bush which reduces the subframe movement. Quantity Required: 2 (Pack Size: 2) / Diag Ref: 21 / Series: Black / Replaces OEM Part Numbers (OEM 1: 33316784940, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Quantity Required: 2 (Pack Size: 2) / Diag Ref: 1 / Series: Black / Replaces OEM Part Numbers (OEM 1: 31126851693, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Quantity Required: 2 (Pack Size: 2) / Diag Ref: 2 / Series: Black / Replaces OEM Part Numbers (OEM 1: 31126864000, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Made using our stiffest Black 95A Durometer Polyurethane with in-house CNC-machined metal components, this new bush provides a durable and reliable alternative to the OEM rubber bushes and a more cost-effective solution to replacing the entire arm. Our bushes have been designed to be 30% stiffer than the standard rubber, for a more responsive and assured handling feel and unlike rubber, will not soften with age providing a truly fit-and-forget solution. Quantity Required: 4 (Pack Size: 4) / Diag Ref: 5 / Series: Black / Replaces OEM Part Numbers (OEM 1: 31126863785, 31126863335, OEM 2: 31126863333, 31126863786, OEM 3: 31126863334)PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Fits vehicles with Non Active Anti Roll Bar, for models with Active Anti Roll Bar use PFF5-1404. Quantity Required: 2 (Pack Size: 2) / Bush Size: 27mm / Diag Ref: 3 / Series: Black / Replaces OEM Part Numbers (OEM 1: Bar = 31356774737 / 31356863638, OEM 2: Bar = 31356863402 / 31356854141, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Quantity Required: 4 (Pack Size: 4) / Diag Ref: 4 / Series: Road / Replaces OEM Part Numbers (OEM 1: 33316770454, ) PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.  Please note that all prices shown on our website are per bush

Read more less

Made from our Black 95A durometer for updated steering precision. Quantity Required: 2 (Pack Size: 2) / Diag Ref: 2 / Series: Road / Replaces OEM Part Numbers (OEM 1: 31106863739, OEM 2: 31106863740, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Adding the insert will stiffen the bush further and potentially increase NVH, especially on diesel-engined vehicles. Quantity Required: 1 (Pack Size: 1) / Diag Ref: 20 / Series: Road / Replaces OEM Part Numbers (OEM 1: 22116885788 (current), OEM 2: 22116875190 (to 23.12.2016), OEM 3: 22116853470 (to 03.09.2014) / 22116872114 (to 04.05.2015))PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Made from our Purple 80A durometer to allow for controlled wishbone articulation.Quantity Required: 2 (Pack Size: 2) / Diag Ref: 1 / Series: Road / Replaces OEM Part Numbers (OEM 1: 31106863739, OEM 2: 31106863740, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

This is a replacement part that uses our Black Series material to boost stiffness over the original part by 18% to withstand increased loading seen by this position on the car. For a caster offset version please use PFF5-4001G. Quantity Required: 2 (Pack Size: 2) / Diag Ref: 1 / Series: Road / Replaces OEM Part Numbers (OEM 1: 31122284531 / 31122284532, OEM 2: 31122283579, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Quantity Required: 1 (Pack Size: 1) / Series: Road / PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

Adding the insert will stiffen the bush further and potentially increase NVH, especially on diesel-engined vehicles. Quantity Required: 1 (Pack Size: 1) / Diag Ref: 20 / Series: Road / Replaces OEM Part Numbers (OEM 1: 22116885788 (current), OEM 2: 22116875190 (to 23.12.2016), OEM 3: 22116853470 (to 03.09.2014) / 22116872114 (to 04.05.2015))PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

This is an insert that fits into voids in the original bush to reduce subframe movement. Quantity Required: 2 (Pack Size: 2) / Diag Ref: 19 / Series: Road / Replaces OEM Part Numbers (OEM 1: 33316792509 , )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

This is an insert that fits into voids in the original bush to reduce subframe movement. Quantity Required: 2 (Pack Size: 2) / Diag Ref: 20 / Series: Road / Replaces OEM Part Numbers (OEM 1: 33316792510, )PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for. 

Read more less

PFR5-1220 is a full replacement bush for non-M models to raise the front of the rear subframe by 9mm, providing the same anti-squat characteristic during acceleration as featured on M model vehicles and is made using our Purple 80A durometer material, recommended for heavily tuned road or occasional track cars. For standard subframe alignment, without anti-squat, please use PFR5-420. Quantity Required: 2 (Pack Size:2) / Diag Ref: 19 / Series: Road / Replaces OEM Part Numbers (OEM 1: 33312283382, ) PRODUCT INFORMATION: For any support or advice please contact us on 0330 122 1950 or email sales@form7perforamnce.com. Road Series – for Road and fast Road use. POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness. Black Series – for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis. Heritage Collection – for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. This new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of Powerflex's parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in the new ‘Classic’ Dark Grey colour suitable for all road-based applications. BEHIND THE SCENES AT POWERFLEX: IMPORTANT INFORMATION: For fitment queries please contact us on +(44 (0)330 122 1950 or at sales@form7performance.com Please note that some product imagery is generic and is used for illustrative purposes only. The kit which you receive will be specific to the vehicle which it is listed for.  The prices shown on our website are per bush. To get the total pack price you will need to multiple this price by the number of bushes per vehicle.

Read more less